If I remember correctly, it is under lan configuration, set route
statements, on the 2074 CAx setup menu.
I believe the default entry is for the gateway. I think this is what you
would need.
route -fh
route add default 10.10.10.251 -hopcount 1
route add -net 10.10.10.251 -netmask 255.0.0.0 -hopcount 1
Just use your own IP addresses.
I am not 100% sure as I use explicit routing to my PCs and the gateway is
the second entry on the route statement. It is the only way I can limit
access to the 2074s.
Whenever I make changes to the IP info, I use the native TCP/IP
configuration utility under OS/2.
Thanks
Bill Bishop
Specialist
Mainframe Support Group
Server Development & Support
Toyota Motor Engineering & Manufacturing North America, Inc.
[email protected]
(502) 570-6143
Jerry Fuchs <[email protected]>
Sent by: IBM Mainframe Discussion List <[email protected]>
01/14/2009 10:25 AM
Please respond to
IBM Mainframe Discussion List <[email protected]>
To
[email protected]
cc
Subject
2074 configuration problem
I am trying to configure our new 2074s. When I boot the machine I get a
message indicating that the network is unreachable.
I have verified the IP address and subnet mask specifications.
My network people tell me that I have to specify the gateway also but I
see no place where this is specified.
Any ideas?
Thanks
Jerry Fuchs
Senior Systems Engineer
Wendy's Arby's Group
One Dave Thomas Blvd.
Dublin, Ohio 43017
(614) 764-3594
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
