Great stuff - that did the trick, thanks Mike! Still a little disruptive though, I'll have to be careful about how and when we do this.
Thanks again. Brian -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Mike Shorkend Sent: 24 January 2009 17:48 To: [email protected] Subject: Re: Refresh telnet server certificate? Brian I ran in to a similar problem a while back. I had to replace the certificate created by gskkyman(not a RACF certificate) but I am guessing it is pretty much the same. I used the V TCPIP,,TELNET,STOP,PORT=xx command followed by an OBEYFILE command pointing to the telnet profile statements. (you will need to replace the xx with the relevant port) If I remember correctly, it was z/OS 1.4 see here for a full explanation of the VARY TELNET commands http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/F1A1C240/1.37?SHELF=EZ2ZO10G&DT=20050708155016 Mike ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
