I tried to save a profile with blank defined capacity and the request failed due to invalid value. Apparently a blank is not acceptable.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Al Sherkow Sent: Thursday, April 23, 2009 7:54 PM To: [email protected] Subject: Re: Soft capping advice sought You don't need to set Defined Capacities for the other LPARs (though you may). If you want to limit the 4HRA of an LPAR to limit what that particular LPAR can contribute the 4HRA of it's products you can. If you don't card about the individual LPARs don't set a defined capacity. The Group Capacity limit will limit the whole group. For example let's say IMS/DB is in only in LPAR C. If you want to limit the IMS/DB charges to xx MSUs then set the Defined Capacity of LPAR C to xx. Otherwise IMS/DB will be billed on LPAR C max 4HRA within the Group. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
