Short answer: most likely not. Slightly longer answer: although all CPU's wait at the same speed, they vary in most everything else.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Charles Mills Sent: Tuesday, July 17, 2012 8:53 AM To: [email protected] Subject: Help with elementary CPU speed question I have gotten dragged into a CPU performance question; a field I know little about. I run a test on a 2094-722. It is rated at 19778 SU/Second. The job consumes .146 CPU seconds total. I run the same job on a 2064-2C3. It is rated at 13378 SU/Second. All other things being roughly equal, should I expect that the job will consume 1.48 (19778/13378) times as much CPU time, or .216 CPU seconds? Is my logic right, or am I off somewhere? I'm not worried about a millisecond or two; just the broad strokes. Thanks, Charles ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
