I suggest you ask this on IBMTCP-L. You will find more help there. Specifically, Chris Mason :)
Dave Gibney Information Technology Services Washington State University > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Mauri Kanter > Sent: Thursday, August 23, 2012 3:16 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: "Delay" Problem with SSL and DVIPA > > Good morning list, > > We are facing a strange "delay" problem with TN3270 and SSL which I > describe below. > > The configuration is as follows: > PRD1 and PRD2 are production LPARs. > DEV1 and DEV2 are development LPARs > PRD1 and DEV1 are on a z114 machine with two OSA cards shared among the > LPARs > PRD2 and DEV2 are on another z114 machine also with two OSA cards shared > among the LPARs. > Neither the machines nor the OSA cards are exactly equal but they are very > similar in many aspects (mips, workload, etc) > > No network problems from the performance point of view… > > Ping times from my desktop are very good for all the IP addresses described > below. And Normal work is ok. Everybody is happy. > > Below the several IP addresses involved: > Each OSA card has an IP address. > Each LPAR has a local VIPA for that LPAR. > Each subplex has a dynamic DVIPA. > DEV1 has VIPADEF defined on the VIPADynamic statement > DEV2 has VIPABackup defined on the VIPADynamic statement > PRD1 has VIPABackup defined on the VIPADynamic statement > PRD2 has VIPADEF defined on the VIPADynamic statement > > For example: VIPADEF MOVE IMMED SERVICEMGR 255.255.255.240 > xxx.xxx.xxx.xxx > > We use SSL to connect to TN2370. > > There is no VIPADIST DEFINE statement neither for the TN3270 SSL port nor > the non-SSL port . > When connecting via SSL to the TN3270 server of DEV1 using the DVIPA of the > development subplex performance is very good. > When connecting via SSL to the TN3270 servers of all the lpar VIPAs the > performance is very good for all 4 LPARs. > > In particular, when pointing PCOMM to the lpar VIPA belonging to PRD2 the > USSTAB shows up immediately in almost "no time" > > However … When pointing PCOMM to the DVIPA belonging to the production > subplex it may take 5 seconds to get the USSTAB. According to our definitions, > the LU name I get, and what I see from NETSTAT HOME, I see that the DVIPA > is held by PRD2. > > To make things more confusing, if I use the non-SSL port of the TN3270 the > "delay" disappears. > > So I do not understand if the problem is SSL, the network, or the distributor. > I'm missing something here … > > Any ideas what to look for? The problem was reported to me lately and also > lately we migrated to z/OS 1.13 from 1.11, but I can not confirm for granted > that z/OS 1.13 is related to the problem. > > Thanks in advance for your help. > > Mauri. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN