What is in your VTAM TRLE nodes? -- Donald J. [email protected]
On Mon, Dec 3, 2012, at 05:43 AM, Rebecca Martin wrote: > We are having problems using port 1 of our new OSA Express3 T1000 on a > z114 (4 ports with 2 PCHID). Running z/OS 1.12. The CHPID is defined as > TYPE=OSE. For both of our two cards that we are trying to also use port > 1, D M=CHP(xx) shows "PATH NOT OPERATIONAL" and "PATH NOT VALIDATED". > Port 0 is fine on both of these. > Based on information from our hardware vendor these are the definitions > we used: > CHPID PATH=(CSS(0),00),SHARED, * > PARTITION=((all lpars,are listed > here),(=)),PCHID=200,TYPE=OSE > CNTLUNIT CUNUMBR=FC00,PATH=((CSS(0),00)),UNIT=OSA > IODEVICE ADDRESS=(FC00,032),CUNUMBR=(FC00),UNIT=OSA > > Because the paths are not operational, I don't think the problem is in > our TCPIP profile but will share that as well for completeness: > DEVICE OSAFC00 LCS FC00 AUTORESTART > LINK ETH1 ETHERNET 0 OSAFC00 > DEVICE OSAFC10 LCS FC10 AUTORESTART > LINK ETH1 ETHERNET 1 OSAFC10 > FC00 is used on 1 LPAR and FC10 on another. > > FC00 - is attached to port 0 (and working) and FC10 should be port 1 > (and is not working). Cabling has been checked multiple times. > > Our hardware vendor has a call into IBM, but I thought I might get an > answer faster here from those that have BTDT. > > Thank you for any help or suggestions. > Rebecca > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN -- http://www.fastmail.fm - A fast, anti-spam email service. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
