Hi, i suggest to take a look to the BUILDMCS command to selectively extract the functions you want to move to 1.13 CSI. Then you would do the RECEIVE, APPLY and ACCEPT sequence into the new SMPE. USERMODs should be RECEIVEd/APPLYed after the products have been re-installed in 1.13 ZONEs.
Regards, Sandro Ambrozic Sandro Ambrozic +34 666 803 223 2012/12/31 John Chase <[email protected]> > We have a few products that were installed into the z/OS 1.11 GLOBAL zone, > and since we completed our z/OS 1.13 upgrade about 6 months ago would like > to "move" them into the z/OS 1.13 GLOBAL zone. The Target and DLIB zones > for each product resides in their own VSAM clusters, and they each have > their own SMPxxS datasets, so ZONEEXPORT -> ZONEIMPORT appear to be > significant "overkill". But SMP/E Reference seems to suggest that merely > defining the ZONEINDEX entries for the Target and DLIB zones in the z/OS > 1.13 GLOBAL zone might be insufficient. > > It's not immediately clear what effect, if any, un-ACCEPTed PTFs might > have on the "move", and there may be one or more USERMODs (that we "never" > ACCEPT). So what appears to be the main concerns are: > > 1) Will the absence of any "knowledge" of the USERMOD in the z/OS 1.13 > Global zone (RMID is kept only in the Target and DLIB zones, right?) > adversely affect a future need to RESTORE the USERMOD (e.g., for subsequent > maintenance APPLY)? It would seem that (re-)RECEIVE of the USERMOD would > not be a problem in any event, since we would normally update the REWORK > (and PRE, if necessary) value anyway. > > 2) Would the absence of the APPLYed but not ACCEPTed product PTFs from > the z/OS 1.13 SMPPTS adversely affect a future ACCEPT of them using the > z/OS 1.13 GLOBAL zone? We normally PURGE the PTFS at successful ACCEPT > time. > > Pointouts of any other potential "gotchas" would also be appreciated. > > Thanks in advance, > > -jc- > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
