Retired Mainframer, I think you hit the nail on the head. Would it be a problem if ACDS and SCDS do not show the same status?
________________________________ From: retired mainframer <[email protected]> To: [email protected] Sent: Thursday, 17 January 2013 2:19 PM Subject: Re: SMS COMMAND VIA BATCH I believe ISMF shows the status in the SCDS while the D command shows the status in the ACDS. VARY commands update the ACDS but you need to manually update the SCDS if you want the change to be reflected in the next ACTIVATE. :>: -----Original Message----- :>: From: IBM Mainframe Discussion List [mailto:[email protected]] On :>: Behalf Of John Dawes :>: Sent: Thursday, January 17, 2013 9:54 AM :>: To: [email protected] :>: Subject: Re: SMS COMMAND VIA BATCH :>: :>: Boris, :>: :>: I tried out your suggestion and it ran well. When I run the command to :>: query the status of the storage group D SMS,SG(CICSSG01),LISTVOL it :>: shows that the VOLUME is D. :>: However, when I check via ISMF it shows that it is in ENABLE status (col :>: 25). I cannot understand which status is right or why there is a :>: discrepancy between the two. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
