Thanks for the clarification, very useful! On Fri, Jun 12, 2020, 08:58 Parwez Hamid <parwez_ha...@hotmail.com> wrote:
> Short answer - YES. > > FC 9975 is basically to reduce the 'height' for shipping/delivery purposes > i.e if there isn't enough height clearance for the doorway. If a system is > ordered with this feature, it just enlongates the install time. Nothing to > stop 'you' to remove and reinstall the top bit. Just be careful with the > cabling etc. > > Regards > > Parwez Hamid​ > > ________________________________ > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> on behalf > of Christian Svensson <0000022ad63487ef-dmarc-requ...@listserv.ua.edu> > Sent: 11 June 2020 23:34 > To: IBM-MAIN@LISTSERV.UA.EDU <IBM-MAIN@LISTSERV.UA.EDU> > Subject: z114 retroactive height reduction (FC 9975) for transportation > > Hi, > > A bit of a niche question maybe, but this list usually enjoys those! > > I need to move my z114, and sadly I don't have the possibility of > inspecting it physically right now. I was wondering if anyone knows if it > is possible to reduce the height of the z114? > In the IMPP there is a FC 9975 which separates the top portion in the > installation, but I have no idea if my individual has that feature. > Looking at older pictures of the frame there appears to be a "cut" between > the BPA and where the battery is supposed to be, so it looks like maybe > removing the side panels, the door, and then one might be able to detach > the top - but that's hard to say for sure on the pictures. > > Does anyone have any experience removing the top portion for > transportation of a z114? Or similar experiences? > > Thanks, > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN