You assign the volume label with ICKDSF. If you init two+ different devices with the same volser and the default for both+ is to be online you will get this message. Since these addresses are quite a bit apart, is one production and one a DR test? If so the Production system should set the address offline or not existing, and the DR system should set the production system addresses as offline or not existing.
On Thu, Nov 19, 2020 at 8:18 PM Steve Lee <[email protected]> wrote: > > Dear, > > These messages come out at the time of IPL in past few IPL cycle; > > IEA213A DUPLICATE VOLUME 'RP@C03' FOUND ON DEVICES 3404 AND 4802. > IEA213A REPLY DEVICE NUMBER WHICH IS TO REMAIN OFFLINE > IEA213A DUPLICATE VOLUME 'RP@C04' FOUND ON DEVICES 3405 AND 4803. > IEA213A REPLY DEVICE NUMBER WHICH IS TO REMAIN OFFLINE > IEA213A DUPLICATE VOLUME 'RP@C05' FOUND ON DEVICES 3406 AND 4804. > IEA213A REPLY DEVICE NUMBER WHICH IS TO REMAIN OFFLINE > ~ > ~ > > **** > > My Research: > > When systems starts initialization after loading it makes some set of volumes > needs to be offline due to saem volume label. > (In IODF part, all volumes listed above are "Offline=No") > Some of the volumes on these system has duplicate volume labels defined to > them, While making these volume offline system gets confused and generates > these WTORs to ask the operator which one to make offline when it finds two > volumes has same volume label. > > There has not been changes to IODF. Storage team can give more clarification > about these volumes gets assigned with duplicate volume labels. > But they are also confused why it happens. > > > Any input will greatly be appreciated. > > Thanks, > Steve > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
