Dear, Using HCD, there is a need to remove a Lpar(Partition) definition from a CEC. As we know much on it, I removed a lpar from the Processor definition which is followed into Processor ID>CSS ID>6. Work with partition. Selected the Lpar and deleted with a Work IODF, and ready to build a Production IODF.
With this process, it is pretty quite simple and straight forward removing the lpar. I however, make sure of a few others that I am a bit concerned below: 1. may lose any of connection from other existing lpars 2. may have any messages from consoles on other existing lpars 3. may have some stuff to do with Sysplex coupled with two CECs, and CF01, 02 in each CEC 4. may have an issue when dynamic refresh with this Lpar removal IODF over all lpars in the CEC in implementing "Activate S/W, and H/W configuration 5. anything that I am not aware of Any input from youall will greatly be appreciated, let me know if any further information needed. Thanks huge in advance!! Steve ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
