Hi lizette, For all the zos mounts, I use my service mount batch job as the template for those in parmlib with modifications to syntaxes to fit. Everything else for /tmp, ,etc, dev, and any other ancillary vendor, user file systems are ieheyeball. There aren't many that would fail an ipl entirely so can be fixed after you are up. There is the health check that was mentioned, but that only calls out differences between what is in parmlib and what is actually mounted.
Hope this helps! ________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Lizette Koehler <[email protected]> Sent: Sunday, January 24, 2021 1:14:28 AM To: [email protected] <[email protected]> Subject: How to validate mount points for IPLs **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** List I am not quite sure what technique or process I can put together to validate the Mount points in BPXPRMxx prior to an IPL SYNTAXCHECK only makes sure that I did not finger check It does not say this will mount or not mount And with z/OS and other products using lots of mount points - hand checking is getting difficult. Any ideas are welcomed. Thank you Lizette ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** ${If.App.WXP}Classification: Internal Use${If.End} This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
