I have a question about RMM. We've received some new cartridges that hadn't
been initialized by the supplier. This caused I/O errors when attempts were
made to mount the cartridges.To avoid these errors we changed their status to
INIT so that they wouldn't be mounted:
DFSMSrmm Volumes (Page 1 of 2) Row 100 to 112 of 139
Command ===> Scroll ===> CSR
Enter HELP or PF1 for the list of available line commands
Use the RIGHT command to view other data columns
Volume Assigned Expir./
Dest- T Data
S serial Owner date Retn. date Ret Status Location ination R sets
-- ------ -------- ---------- ---------- --- ------- -------- -------- - -----
700101 15/09/2021 V INIT TS3500
N 0
700102 15/09/2021 V INIT TS3500
N 0
700103 15/09/2021 V INIT TS3500
N 0
700104 15/09/2021 V INIT TS3500
N 0
700105 15/09/2021 V INIT TS3500
N 0
700106 15/09/2021 V INIT TS3500
N 0
700107 15/09/2021 V INIT TS3500
N 0
700108 15/09/2021 V INIT TS3500
N 0
700109 15/09/2021 V INIT TS3500
N 0
700110 15/09/2021 V INIT TS3500
N 0
700111 15/09/2021 V INIT TS3500
N 0
700112 15/09/2021 V INIT TS3500
N 0
700113 15/09/2021 V INIT TS3500
N 0
However this means that they are still unusable and have been since September.
All we need to do is initialize them but there's a shortage of RMM knowledge
around here. Could anyone please give me some advice on how to do this ? It
would be greatly appreciated. Someone suggested using INITT but I suspect that
that's not appropriate here.
Regards,
John.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
