Ops. If you need a large space for allocations but the storage group is fairly large, you can set some volumes to quiesce. No allocations will take place on this volume unless it won't fit on ALL the Enabled volume.
On Sat, Jan 8, 2022 at 9:45 PM Mike Schwab <mike.a.sch...@gmail.com> wrote: > > Specific information for this return code: One of the following occurred: > v An extend was attempted, but no space was available on user volume. > v No secondary space quantity was specified and no candidate volumes are > available. > System action: Extend processing is ended for this data set. The error > flag (ACBERFLG) in the ACB (access method > block) for the data set is unchanged. > Programmer response: Scratch data sets from the volume, or run an access > method services command to add more > candidate volumes to the catalog entry for the data set. > > > Dataset needs more space. > Volume does not have enough space to satisfy a secondary extent. > Additional volumes not allowed. > > Actions: Review free space on all volumes in storage group. If low > add space to volume (dynamic volume size) or more volumes per storage > group definition. > Review data set size and definitions for > number of volumes (limit 59, reorg if large), > number of extents (defragment if large), > secondary extents size (if large alter to reduce secondary), > ***** number of candidate voles (if none alter to add candidate volumes) ***** > > On Sat, Jan 8, 2022 at 8:48 PM AbsKerneels > <kerne...@absoftwareconsultants.com> wrote: > > > > Hi, > > > > Anybody had this type of problem before ? > > > > Summary: > > > > It's on different packs. > > It's all DB2 Data spaces. > > It's looks like the "volume count" in the default SMS Data group for > > these vsam files that needs tweaking. > > > > Date: 4 Jan 2022 > > > > IEC070I 209-220,DB2PDBM1,DB2PDBM1,A0016E73,7514,SHE020, 781 > > IEC070I S74P.DSNDBC.PLANTABD.IMC32F3D.I0001.A001, > > IEC070I S74P.DSNDBD.PLANTABD.IMC32F3D.I0001.A001, > > IEC070I SYSTEM.SERIES3.PROD.USERCAT > > > > Date: 7 Jan 2022 > > > > 07H00 > > > > IEC070I 209-220,DB2PDBM1,DB2PDBM1,A0016E73,7514,SHE020, 781 > > IEC070I S74P.DSNDBC.PLANTABD.IMC32F3D.I0001.A001, > > IEC070I S74P.DSNDBD.PLANTABD.IMC32F3D.I0001.A001, > > > > 11:26:59.32 > > > > IEC070I 209-220,DB2PDBM1,DB2PDBM1,A0036EF9,74A9,SHD009, 946 > > IEC070I S74P.DSNDBC.QPIAR70P.IAPBIAQ.I0001.A001, > > IEC070I S74P.DSNDBD.QPIAR70P.IAPBIAQ.I0001.A001, > > IEC070I SYSTEM.SERIES3.PROD.USERCAT > > > > 8 Jan 2022 > > > > IEC070I 209-220,DB2PDBM1,DB2PDBM1,A0049F94,744F,SHB015, 877 > > IEC070I S74P.DSNDBC.PLANTABD.IMF1C0DE.I0001.A001, > > IEC070I S74P.DSNDBD.PLANTABD.IMF1C0DE.I0001.A001, > > IEC070I SYSTEM.SERIES3.PROD.USERCAT > > > > > > IEC070I rc[(sfi)]- ccc,jjj,sss,ddname, dev,volser,xxx,dsname,cat > > Explanation: An error occurred during EOV (end-of-volume) processing > > for a VSAM data set. > > In the message text: > > rc The return code. This field indicates the specific cause of the > > error. For an explanation of this return code, see > > message IEC161I. > > sfi > > Subfunction information (error information returned by another > > subsystem or component). This field appears > > only for certain return codes, and its format is shown with those > > codes to which it applies. When a catalog > > LOCATE request fails, this field appears for return code 032 or 034. > > ccc > > A problem-determination function (PDF) code. The PDF code is for use > > by the IBM Support Center if further > > problem determination is required. If the PDF code has meaning for the > > user, it is documented with the > > corresponding reason code (rc). > > jjj > > The job name. > > sss > > The step name. If the step is part of a procedure, this field contains > > an eight-character procedure step name, with > > trailing blanks, followed by the name of the job step that called the > > procedure, without trailing blanks. The two > > names are not separated by a comma. > > ddname > > The data definition (DD) name. > > dev > > The device number, if the error is related to a specific device. > > volser > > The volume serial number, if the error is related to a specific volume. > > xxx > > The name of the cluster that contained the data set being processed > > when the error was detected, or when not > > available, the data set name specified in the DD statement indicated > > in the access method control block (ACB). > > dsname > > The name of the data set being processed when the error was detected.\ > > > > IEC161I (return code 209) rc[(sfi)]-ccc,jjj, sss,ddname,dev,ser,xxx, > > dsname,cat > > Explanation: For general information about message IEC161I, see the > > explanation for return code 001. > > Specific information for this return code: One of the following occurred: > > v An extend was attempted, but no space was available on user volume. > > v No secondary space quantity was specified and no candidate volumes are > > available. > > System action: Extend processing is ended for this data set. The error > > flag (ACBERFLG) in the ACB (access method > > block) for the data set is unchanged. > > Programmer response: Scratch data sets from the volume, or run an access > > method services command to add more > > candidate volumes to the catalog entry for the data set. > > Module: IDA0557X, IDA0557E > > Routing code: 11 > > Descriptor code: 6 > > > > > > z) Volume SHE020 > > > > SYS1.VTOCIX.SHE020 > > SYS1.VVDS.VSHE020 > > S74P.DSNDBD.LOSSC70D.SELOBDXC.I0001.A001 VS-E > > S74P.DSNDBD.PLANTABD.DSNRPGRO.I0001.A001 VS-E > > S74P.DSNDBD.PLANTABD.LQIB0001.I0001.A001 VS-E > > S74P.DSNDBD.QPCWR70P.CWSBCCFS.J0001.A001 VS-E > > S74P.DSNDBD.RECPT01D.PAYVALTS.I0001.A001 VS-E > > S74P.DSNDBD.RECPT01D.WALLETX2.I0001.A001 VS-E > > > > > > > > D U,,,7514,1 > > IEE457I 13.16.42 UNIT STATUS 143 > > UNIT TYPE STATUS VOLSER VOL > > 7514 3390 A SHE020 PRI > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > Mike A Schwab, Springfield IL USA > Where do Forest Rangers go to get away from it all? -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
