So the IBM FRU for the cable is : 46F3786(B) Joe
On Fri, Apr 1, 2022 at 8:14 PM Jay Maynard <[email protected]> wrote: > Doesn't look like it: the PC end of the cable has 4 rows of pins, and the > card has 3. > > On Fri, Apr 1, 2022, 20:10 Joe Monk <[email protected]> wrote: > > > This? > > > > > > > https://www.ebay.com/itm/383952914163?hash=item59656086f3:g:QWUAAOSwvaJgJqKH > > > > Joe > > > > On Fri, Apr 1, 2022 at 2:16 PM Jay Maynard <[email protected]> wrote: > > > > > I fired up my old P/370 the other day and got it running again. (One > hard > > > disk had croaked.) I didn't remember what cards I had in it, so I > pulled > > > the lid off and looked - and lo and behold, along with the P/370 card > > > itself was a S/370 Channel Emulator/A card, 06F3160. No cable for it, > > > sadly. > > > > > > And then I bought another RS/6000 to put my other P/370 card into off > of > > > eBAy - and lo and behold, it too has one of those in it! > > > > > > So now I have two P/370 (technically, RS/370) systems that I can hook > > > channel stuff up to - if I had the cable. I even have a > channel-attached > > > 3174 (that's currently hooked up to one of my two P/390s). So, anyone > > know > > > where I might be able to lay hands on a couple of cables, and a couple > of > > > bus and tag terminator sets? > > > > > > I also have a Multiprotocol Adapter/A in the first P/370; not sure what > > > it's useful for, but I could use a cable for one of those, too. > > > -- > > > Jay Maynard > > > > > > ---------------------------------------------------------------------- > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to [email protected] with the message: INFO IBM-MAIN > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
