Was the module loaded at the time you set the SLIP?
-- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 ________________________________________ From: IBM Mainframe Discussion List [[email protected]] on behalf of Robin Atwood [[email protected]] Sent: Tuesday, June 7, 2022 9:19 AM To: [email protected] Subject: SLIP IF not working I wanted to get a dump of my server when the instruction at 001234 in module MOD1 gets executed, so I entered: SLIP SET,IF,J=SRV1,PVTMOD=(MOD1,001234),ID=SLP1,END I made a transaction that drove MOD1 but no dump was taken. So, OK, the offset maybe incorrect (there are lots of csects in MOD1) and I adjusted the offset, but to no avail. So just to see if the trap worked at all, I entered: SLIP SET,IF,J=SRV1,PVTMOD=(MOD1),ID=SLP1,END but still no dump. So I must be missing something basic; I was recently doing a lot of SLIP SA traps and didn't have this trouble. MOD1 is definitely in memory at the time the SLIP command is issued. Any advice much appreciated. Thanks Robin ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
