FYI
I just did some tests with SMFLIMxx and found the following curiosity
Background:
Without SMFLIMxx, IEFUSI etc. when you request REGION=4M you get 4M
below the line *and* 32M above the line.
That works for 4M and all available values below 16M line. When you
request too much you'll get S822.
When you request REGION=20M you will get all available 24-bit memory and
...32M. :-)
When you request REGION=45M you will get all available 24-bit memory and
45M.
So far, so good.
Now we have REGIONX. You can now specify values for 24-bit and 31-bit
memory.
However when you specify null value, you get
all available memory below the line
128M above the line.
(simplified a little bit)
Now SMFLIMxx
When you change/adjust REGIONBELOW to NOLIMIT for your job, you will
also get ...128M
While it can be fine to change all the 4M's 1M's and so on to all below
the line, the "gift" of 128M above is a little bit surprising.
Any comments?
--
Radoslaw Skorupka
Lodz, Poland
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
