Thanks for this Tim.

John T. Abell   
Tel: 800-295-7608  Option 4
President 
International: 1-416-593-5578  Option 4
E-mail:  [email protected]
Fax: 800-295-7609

International: 1-416-593-5579


International Software Products
www.ispinfo.com
        

This email may contain confidential and privileged material for the sole use
of the intended recipient(s). Any review, use, retention, distribution or
disclosure by others is strictly prohibited. If you are not the intended 
recipient (or authorized to receive on behalf of the named recipient),
please contact the sender by reply email and delete all copies of this
message. Also,email is susceptible to data corruption, interception, 
tampering, unauthorized amendment and viruses. We only send and receive
emails on the basis that we are not liable for any such corruption,
interception, tampering, amendment or viruses or any consequence thereof.

-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Timothy Sipples
Sent: Tuesday, August 25, 2026 9:06 PM
To: [email protected]
Subject: Check Your Feature Codes! (Deadline Approaching)

If you have an IBM z16 or LinuxONE 4 machine, or newer, this post is for
you. I suggest you check the Feature Codes (FCs) installed on your machine
to make sure you have everything you might need. A couple Feature Codes are
available at no additional charge, but for IBM Machine Type 3931 you must
get your order to IBM no later than December 30, 2026. Please don’t wait
that long. And if you have some other machine type, also place your order
now.

Here are some Feature Codes to check on your machines:


  1.
Feature Code 3863: CP Assist for Cryptographic Functions. FC3863 enables the
full range of CPACF instructions. It’s been a long time since I’ve seen a
machine without FC3863, but maybe there are a few exceptions. Many software
components exploit CPACF instructions for AES encryption/decryption and
other algorithms. FC3863 is available at no additional charge. It’s possible
in a couple countries you’ll need extra paperwork to get this feature code,
so don’t delay.
  2.
Feature Code 0115: Secure Execution for Linux. FC0115 provides the
foundation for all IBM Confidential Computing (formerly “Hyper Protect”)
runtime environments. These Trusted Execution Environments are vital for
sensitive workloads such as HashiCorp Vault and digital asset applications
including IBM Digital Asset Haven and IBM Offline Signing Orchestrator — and
any other workloads you deem sensitive. Usually this feature code is most
relevant on systems with at least 1 IFL, but it can still be occasionally
useful on other machines (at least for pilots/proofs of concept). FC0115 is
also available at no additional charge. It doesn’t hurt, and it might help.
  3.
Feature Code 1021: Server Time Protocol (STP). Nowadays most machines that
leave the factory have this feature code installed, but there are a few that
don’t. If you don’t have this feature code then you can’t sync your
machine’s system clocks with something as simple as an SNTP-compatible time
server. Most people think of this server capability as utterly basic, and it
is. But technically it’s optional on IBM Z and LinuxONE machines, so please
make sure you have the STP feature code. (There could be a modest charge for
this one.)
  4.
Feature Code 0644: Virtual Flash Memory. FC0644 is particularly important to
z/OS shops. Validated Boot for z/OS requires this feature code to protect
the integrity of your z/OS operating system images. (Secure Boot for Linux
does not require this feature code.) If you don’t have Validated Boot fully
enabled, your z/OS images are potentially vulnerable to tampering —
malicious and inadvertent. Validated Boot is included with z/OS at no
additional charge, but there’s a typically modest charge for FC0644. FC0644
also improves the performance of z/OS dumps. On IBM 3931-A01 machines you’ll
only be able to order FC0644 if your machine already contains enough
physical memory modules to support the feature. Quantity 1 of FC0644 is
sufficient to support Validated Boot for z/OS.
  5.
Feature Code 1961 (and related Feature Codes): zIIP. If you’re running z/OS
and don’t have a zIIP yet, you probably should get one. Or even a couple.
Yes, it’s chargeable, but there are so many workloads that exploit zIIPs
nowadays. It seems like every month that passes there’s at least one more.
On IBM 3931-A01 machines you’ll need at least one unallocated processor core
already on your machine to order this feature code. (Usually true.)

Did I miss any important Feature Codes also worth checking?

— — — — —
Timothy Sipples
Senior Architect and Cybersecurity Technical Leader IBM Z/LinuxONE,
Asia-Pacific [email protected]


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email
to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to