"Splitting data from Instruction areas (I-Bank/D-Bank) is really needed ..."
this is known as SIIS ... store into instruction stream.
I had to work on some my customer's very old Assembler routines (from
the early 80's) in 2021.
The routines are at the base of the IMS dialog framework and performance
degraded heavily, when they switched to a
new machine model. The Assembler routines showed heavy cache losses, and
we had to fix them due to these effects.
There were 4 major issues:
1. home written structered programming macros (IF, THEN, ELSE) ...
especially LOOP, which stored its loop control variable near the
instruction stream :-)
2. other home grown macros which stored their variables near the
I-stream (using the *+offset approach)
3. or IBM macros, doing the same
4. home grown "procedure" macros, which have their local (static)
variables just behind the instructions; so the distance to the I-stream
is too small
What I did (in short):
- creating a DSECT in the overall startup macro, where the other macros
can put their variables into, and allocating the space for it later,
far away from the I-stream (this resolves 1 and 2)
- create home grown solutions for the IBM macros, TIME comes to mind -
this resolves 3
- create some space (512 bytes) after the end of the procedure and
before the variables start (subtract the length of the created literals
before) - resolves 4
In the end, we resolved the cache losses and performance returned to
"normal".
HTH, kind regards
Bernd
Am 28.08.2026 um 21:32 schrieb Steve Thompson:
Well, given the amount of I/O the product does, it is sensitive to
various changes that IBM has done. Splitting data from Instruction
areas (I-Bank/D-Bank) is really needed from my experience working on
old ALC code written from Base S/370 through ESA. Amazing what speed
increases you get when you stop having contaminated cache lines. Think
in terms of OPEN in line with other code that is NOT using a work
area. The same for PUT/GET, etc.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN