On Tue, 6 Aug 2013 11:26:28 -0400, Richards, Robert B. <[email protected]> wrote:
>I just turned HYPERPAV=YES on last weekend and was curious as to whether these >settings are still appropriate in WLM: > >I/O priority management . . . . . . . . YES (Yes or No) >Dynamic alias tuning management . . . . YES (Yes or No) > >I am also curious about the HCD settings. Are they ignored when HYPERPAV=YES >is set? > >I googled the topic and most posts were several years old. Any advice is >appreciated. > >Bob > Spoke to Bob on the phone (what you couldn't wait for me to see the post? ;-) ) ... but for the archives. I/O priority management is a separate issue and should be set to YES Dynamic alias tuning management can be set to NO as long as you have APAR OA32453 applied. http://www-01.ibm.com/support/docview.wss?uid=isg1OA32453 Are you going to reduce the number of aliases now? You shouldn't need as many. You might want to look for some SHARE papers (or white papers?) also. They would probably be mostly old at this point. One I'm looking at is from SHARE Session # 3075 in SanDiego - think that was 2007. Mark -- Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS mailto:[email protected] Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html Systems Programming expert at http://expertanswercenter.techtarget.com/ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
