At z/OS V1.7 and above (I think) you use IPCS to unload the trace data. VERBX SMSDATA 'TRACE'
Lizette -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Lizette Koehler Sent: Thursday, September 12, 2013 1:55 AM To: [email protected] Subject: Re: ACS routine trace. You might try this url https://www-304.ibm.com/support/docview.wss?uid=isg3S1000411 Problems with ACS routines and how to set an ACS trace I am not sure how to pull the ACS Trace and read it after it is collected. I like a tool called SMSDEBUG for this, but that is a purchase. Lizette -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Vernooij, CP - SPLXM Sent: Thursday, September 12, 2013 1:23 AM To: [email protected] Subject: ACS routine trace. Hello, I have an problem in my StorClas ACS routine, which I cannot put my finger on. The routine is suspected to not assign a Storclas to an allocation request, which causes the request to fail. However I cannot find if it really does and if so, why. WRITE commands are useless, because these messages will never be displayed if the allocation is done by dynamic allocation, which is the case here. Is there any other way to find out what my StorClas routine does and decides? Thanks, Kees. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
