You need to tell us what software is experiencing the 0C4 abends. You also should start your own discussion, with a new subject, for this since it is not at all related to the discussion you chose to reply to.
>-----Original Message----- >From: IBM Mainframe Discussion List [mailto:[email protected]] On >Behalf Of suresh chacko >Sent: Thursday, October 17, 2013 7:06 AM >To: [email protected] >Subject: Re: Explanation of S0C4 reason 4 > >In my shop we were using lots of tape jobs which are of 3490 old VTS >kind. >Currently migrating to IBM7700 VTL. > >We experience lots of batch jobs failures from 3490 VTS followed by >equipment check 0C4 -11 or 4. These jobs are reading dataset written on >multiple logical volumes. What I noticed the 0C4-11 will be occurred >immediately after an equipment check on VTS drive causing I/O error. > >Kindly explain why these jobs are failing due to 0C4-11 or 4 after an >I/O error and ECK of device. Like to have explanation on 0C4-11. >I also experienced 0C4 without ECK I/O error too. > >Please help me solution how to overcome this scenario. In this case how >I can display the PSW of the abended job to see the key. > >Appreciate your responses in this subject. > > > >Thanks, >Suresh Chacko > > >On Wed, Oct 16, 2013 at 3:56 PM, Micheal Butz ><[email protected]>wrote: > >> Hi >> >> As I am in the middle of debugging my TSO command processor code snip ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
