Good morning,
Yesterday we had an issue I'd like to share just in case someone has
experienced it before.
Sometime in the morning this piece of log appeared on syslog
IEE501I CONSOLE UC4CN000 FAILED, REASON=ABTERM. ALL ALTERNATES UNAVAILABLE
, CONSOLE IS NOT SWITCHED
IEA631I OPERATOR UC4CN000 NOW INACTIVE, SYSTEM=CPUA , LU=UC4TR000
IEE828E SOME MESSAGES NOW SENT TO HARDCOPY ONLY
Please notice this is not a "standard" console, it is somehow related to
the product UC4 which is a Batch scheduler. We are still talking to support
in order to know how this exactly works.
The real problem was that from this moment no started tasks could be
started, all of them crashed on start:
START MVTASA.ST8005
$HASP100 MVTASA ON STCINRDR
OMS9612I PROCESSING INIT (STC09784)
IEF695I START MVTASA WITH JOBNAME MVTASA IS ASSIGNED TO USER STCSYS
, GROUP STCGRP
$HASP373 MVTASA STARTED
IEA995I SYMPTOM DUMP OUTPUT 893
SYSTEM COMPLETION CODE=602 REASON CODE=00000000
TIME=08.32.24 SEQ=09184 CPU=0041 ASID=008F
PSW AT TIME OF ERROR 070C1000 80FEB316 ILC 2 INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 00FEB310 - 00181610 0A0D0000 00FF6258
AR/GR 0: 00000000/84000000 1: 00000000/84602000
2: 0181001D/00000000 3: 00000000/00F61100
4: 00000000/008FFBF8 5: 00000000/000AB76C
6: 00000000/89494736 7: 00000000/00FB8D00
8: 00000000/00FEA621 9: 00000000/00000000
A: 00000000/00000000 B: 00000000/008FECA8
C: 00000000/00000041 D: 00000000/0BF00E78
E: 00000000/00FF0280 F: 00000000/00000000
END OF SYMPTOM DUMP
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=008F.
$HASP310 MVTASA TERMINATED AT END OF MEMORY
We arrived a few minutes later. At this point some critical tasks in this
shop required to be started as a started task so we had to stop and IPL the
whole LPAR before major incidents appeared. With the fresh IPL the whole
system worked fine.
The last few lines of log (stopping JES2) during the stop showed us these
lines.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=0024.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=002D.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME/ASID NOT AVAILABLE.
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
$HASP310 INIT TERMINATED AT END OF MEMORY
Has anyone experienced something similar?
Regards,
Ferran
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
