Hi,
z9 LPARs are on z/OS V2.1 and z10 LPARs are at V1.13.
I have done a test activate followed by soft activate on one of the LPARs
on z9. I have not IPL-ed that LPAR.
D M=CHP(xx) shows the following (i am showing output for one CHPID only,
other CHPID output are similar)
IEE174I 20.10.13 DISPLAY M 741
CHPID 01: TYPE=1A, DESC=FICON POINT TO POINT, ONLINE
DEVICE STATUS FOR CHANNEL PATH 01
0 1 2 3 4 5 6 7 8 9 A B C D E F
D90 + + + + + + + + + + + + + + + +
D91 + + + + $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D92 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D93 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D94 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D95 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D96 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D97 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D98 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D99 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9A $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9B $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9C $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9D $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9E $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
D9F $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ .
DA0 + + + + + + + + + + + + + + + +
DA1 + + + + + + + + + + + + + + + +
DA2 + + + + + + + + + + + + + + + +
DA3 + + + + + + + + + + + + + + + +
DA4 + + + + + + + + + + + + + + + +
and goes until
E8F $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ .
E90 + + + + + + + + + + + + $@ $@ $@ $@
E91 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E92 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E93 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E94 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E95 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E96 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E97 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E98 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E99 $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9A $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9B $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9C $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9D $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9E $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@
E9F $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ $@ .
SWITCH DEVICE NUMBER = NONE
SWITCH DEVICE NUMBER = NONE
ATTACHED ND = 002107.931.IBM.75.0000000DYXD1
PHYSICAL CHANNEL ID = 0100
************************ SYMBOL EXPLANATIONS ************************
+ ONLINE @ PATH NOT VALIDATED - OFFLINE . DOES NOT EXIST
* PHYSICALLY ONLINE $ PATH NOT OPERATIONAL
It does not show the range that I have added (D100 onwards)
Here is the output of D M=DEV(xxxx)
D M=DEV(D100)
IEE174I 20.13.32 DISPLAY M 774
DEVICE 0D100 STATUS=DEVICE NOT AVAILABLE
Below is the output of devserv command
ds p,d100
IEE459I 20.15.03 DEVSERV PATHS 784
UNIT DTYPE M CNT VOLSER CHPID=PATH STATUS
RTYPE SSID CFW TC DFW PIN DC-STATE CCA DDC CYL CU-TYPE
0D100,3390 ,F,000, ,UCB NOT CONNECTED, PATH STATUS UNAVAILABLE
************************ SYMBOL DEFINITIONS ************************
F = OFFLINE
Thanks,
P.Mukhopadhyay
On Thu, Jun 12, 2014 at 8:12 PM, Lizette Koehler <[email protected]>
wrote:
> I forgot to add, show the output. Don't tell us what the output has.
>
> Lizette
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of Lizette Koehler
> > Sent: Thursday, June 12, 2014 7:39 AM
> > To: [email protected]
> > Subject: Re: IODF/HCD query reg DASD
> >
> > What version of z/OS?
> >
> >
> > What do you get with
> >
> > D M=CHP(xx)
> > D M=DEV(xxxx)
> >
> > Did you IPL or do a soft activate?
> >
> > Have you done a TEST Activate?
> >
> >
> >
> > Lizette
> >
> >
> > > -----Original Message-----
> > > From: IBM Mainframe Discussion List [mailto:[email protected]]
> > > On Behalf Of P. Mukhopadhyay
> > > Sent: Thursday, June 12, 2014 7:25 AM
> > > To: [email protected]
> > > Subject: IODF/HCD query reg DASD
> > >
> > > Hello,
> > >
> > > Need help regarding IODF configuration using HCD.
> > >
> > > There are two system z hardware in our data center (z9 EC and z10 EC).
> > > Both of them are connected to same DS8100 storage. The CHPIDs from z9
> > > and z10 connect to different storage LCUs in same DS8100.
> > >
> > > With the existing z9 CHPIDs (which are already in use) I would like to
> > > make z10 LCU number 02 DASD devices (already online on z10), visible
> > > to z9 LPARs. For this, I have added a control unit (type 2107) in the
> > > z9 IODF with the LCU number 02 and added 256 DASD devices (type 3390).
> > >
> > > I have activated (software only) the production IODF on z9,
> successfully.
> > >
> > > However, when I try to vary the devices online on z9, I get an error
> message:
> > > IEE025I UNIT XXXX HAS NO LOGICAL PATHS
> > >
> > > I have executed /d m=chp(nn) commands with all the CHPIDs in use on
> > > z9, but the output does not show the DASD device range that I have
> added
> > through the IODF.
> > >
> > > Next, I have executed DEVSERV PATH command as follows:
> > > /DS P,XXXX where XXXX is the device number
> > >
> > >
> > > The command output shows UCB NOT CONNECTED, PATH STATUS
> > UNAVAILABLE
> > >
> > > IEE459I 18.05.40 DEVSERV PATHS 220
> > > UNIT DTYPE M CNT VOLSER CHPID=PATH STATUS
> > > RTYPE SSID CFW TC DFW PIN DC-STATE CCA DDC CYL CU-
> > TYPE
> > > 0XXXX,3390 ,F,000, ,UCB NOT CONNECTED, PATH STATUS
> > > UNAVAILABLE
> > > ************************ SYMBOL DEFINITIONS ************************ F
> > > = OFFLINE
> > >
> > >
> > >
> > > I have tried this in two different ways by:
> > >
> > > 1. using same CU and device names on z9 as well as z10. e.g. the CU is
> > > called
> > > D100 on both z9 and z10 and the devices are called D100 to D1FF
> > >
> > > 2. using different CU/device names. e.g. on z10 CU is called B100 and
> > > devices are called B100 to B1FF whereas on z9 the CU was named A100
> > > and devices A100 to A1FF.
> > >
> > > Neither of these worked :(
> > >
> > >
> > > I am not sure if I am missing anything here. Any pointer/suggestion to
> > > make the device visible will be highly appreciated.
> > >
> > > Thanks,
> > > P. Mukhopadhyay
> > >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
