Dave, Why are you hitting PF1 when Kolusu (and the manual) says to place the cursor on a task and press ENTER. This gives a full display of the selected task with the values spelled out in full.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Hansen, Dave L - Eagan, MN Sent: 11 September 2014 22:34 To: [email protected] Subject: Re: Help with CICS CEMT display Kolusu, Thank you for your suggestions. I tabbed to the beginning of the line and hit PF1 and just got the general help. I placed the cursor on TAS and hit PF1, and also on TRA and hit PF1. Yup, I also tried it with the cursor on "SUS". The link is a good one. But it doesn't tell me the field names I am seeing on the display: Tas(0000029) Tra(JNL2) Sus Tas Pri( 255 ) Sta(U ) Use(CICMNX1 ) Uow(CDBC6D3E2D965E09) Tas(0002138) Tra(CEMT) Fac(0001) Run Ter Pri( 255 ) Sta(TO) Use(PMSBDH ) Uow(CDBE117F38E7F508) The second entry is me running CEMT. It has a field called FAC. Not sure why after all these years things just show up as "RUN" and "TER" like on the CEMT display. I would imagine it's a facility and I'm runnable. I keep looking, Dave -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Sri h Kolusu Sent: Thursday, September 11, 2014 4:22 PM To: [email protected] Subject: Re: Help with CICS CEMT display Dave, Place the cursor on the transaction you are interested and press ENTER and CICS will display the transaction in detail Check this link which explains in detail about CEMT INQ TASK http://pic.dhe.ibm.com/infocenter/cicsts/v4r1/index.jsp?topic=%2Fcom.ibm .cics.ts.doc%2Fdfha7%2Ftransactions%2Fcemt%2Fdfha71l.html Thanks Kolusu IBM Mainframe Discussion List <[email protected]> wrote on 09/11/2014 02:17:08 PM: > From: "Hansen, Dave L - Eagan, MN" <[email protected]> > To: [email protected] > Date: 09/11/2014 02:17 PM > Subject: Help with CICS CEMT display > Sent by: IBM Mainframe Discussion List <[email protected]> > > Dear Listeners (Still not on the CICS-L listserv yet), > > I entered a CICS command. It was CEMT INQ TAS. Here is the output > from my 3,720 emulation: > > Tas(0000043) Tra(AAON) Sus Tas Pri( 255 ) > Sta(SD) Use(CICMNX1 ) Uow(CDBC6D36F2AD2309) Hty(EKCWAIT ) > Tas(0000053) Tra(XPFS) Sus Tas Pri( 001 ) > Sta(S ) Use(CICMNX1 ) Uow(CDBC6D3956983D08) Hty(EKCWAIT ) > Tas(0002101) Tra(CEMT) Fac(0001) Run Ter Pri( 255 ) > Sta(TO) Use(PMSBDH ) Uow(CDBE0A26F9188109) > > Once there was a time I would INSERVICE and ACQUIRE stuff. Now I'm > just trying to find out what the layout of the display is. > > I see the following "fields": TAS(xxx) TRA(xxx) SUS TAS PRI(xxx) > STA(xx) USE(XXX) UOW(xxx) HTY(xxx). I can guess that TAS is task and > TRA is transaction. And I'd bet SUS is suspended. I tried PF1, but > it wasn't the help I was looking for. > > I would like to find some information like: > > Results > The following example output is typical output from the inquire command. > > TAS(nnnnn) ppp ddd cc tttt TCL(tttttttt) USE(aaaaaaaa) ATT(sssss) CPU(sssss) > RUA(sssss) HTI(sssss) HTY(rrrrrrrr) HVA(rrrrrrrr) > > This is from: CEKL INQUIRE TASK documented in the CICS Supplied > Transactions book. I can find a whole section on HTY codes listed > under "The resources that CICS tasks can wait for" documented at the > infocenter. I found EKCWAIT. > > I even tried "Using the information center" @ http:// > pic.dhe.ibm.com/infocenter/cicsts/v5r1/index.jsp to look for CEMT > display info. > > Maybe we know this so well we don't need to document it any more. > I noticed the RCF in the back of the books for CICS go to Hursley Park > in the UK. Lots of postage! > > > Thanks again, Dave > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN This e-mail message has been scanned and cleared by Postini / Google Message Security and the UNICOM Global security systems. This message is for the named person's use only. If you receive this message in error, please delete it and notify the sender. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
