You did not indicate your level of z/OS You may also check out the 4026 code in this link http://pic.dhe.ibm.com/infocenter/zos/v2r1/index.jsp?topic=%2Fcom.ibm.zos.v2r1.ieam100%2Frs16463.htm
4026 This error is caused by an incomplete shutdown of a previous XRC session, and can be associated with a system abend. If the ANTASnnn address space is active, cancel both it and the ANTAS000 address space. Reissue the XSTART or XRECOVER command. If the problem persists, generate a dump (if possible) of the ANTAS000 and ANTASnnn address spaces. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Lizette Koehler > Sent: Monday, September 22, 2014 7:11 AM > To: [email protected] > Subject: Re: SDM ANTAS001 Problem. > > This is probably an event you should raise an SR/ETR with IBM about. > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] > > On Behalf Of Mehrshad Manshadi > > Sent: Monday, September 22, 2014 7:09 AM > > To: [email protected] > > Subject: SDM ANTAS001 Problem. > > > > Hi,After completion concurrent copy in the XRC session while all the > > volumes are in DUP status we encountered the following messages and > > the ANTAS001 will dropped. > > ANTQ5006E XQUERY FAILED FOR SESSION(DS1), RC=4026 REAS=0 > IEA989I SLIP > > TRAP ID=X80A MATCHED. JOBNAME=ANTAS001, ASID=0040. IEA989I > SLIP TRAP > > ID=X80A MATCHED. JOBNAME=ANTAS001, ASID=0040. IEA705I ERROR > DURING > > GETMAIN SYS CODE = 80A-10 IEESYSAS ANTAS001 00 IEA705I 00FA6A00 > > 00A8C690 00A8C690 00E61200 00002000 IEA705I ERROR DURING > GETMAIN SYS > > CODE = 80A-10 IEESYSAS ANTAS001 00 IEA705I > > 00FA6A00 00A8C690 00A8C690 00E61200 00005000 > > > > Please lead me if you have same experience. > > Best regardsManshadi > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
