I checked the restored one. It was ok. I'm currently running IEBPDSE against the failing version, this time in the prod system (where I was just "hanging" when trying to browse it). When running the same job in the DEV system it took just 4 seconds, but now in the prod system it is still running after >10 minutes. It consumes CPU time but no EXCP (stands still at 4 EXCP). When run in the DEV system it consumed 10213 EXCP.
Best Regards, Thomas Berg ___________________________________________________________________ Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) Interactive is 'manual.' Batch is 'automatic.' > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of > Mark Jacobs - Listserv > Sent: Tuesday, May 26, 2015 4:04 AM > To: [email protected] > Subject: Re: Corrupt PDSE - IGW699I PDSE Directory Validation Unsuccessful > > Yea, it looks damaged to me too. I'd still recommend that you validate > the integrity of the restored dataset, just to be safe. > > Mark Jacobs > > > Thomas Berg <mailto:[email protected]> > > May 25, 2015 at 10:00 PM > > Tried on another prodsystem. Got this: > > > > IGW699I PDSE Directory Validation Unsuccessful > > IEA995I SYMPTOM DUMP OUTPUT > > SYSTEM COMPLETION CODE=0F4 REASON CODE=00000024 > > TIME=03.59.10 SEQ=44968 CPU=0000 ASID=01F8 > > PSW AT TIME OF ERROR 075C1000 88FDA690 ILC 2 INTC 0D > > NO ACTIVE MODULE FOUND - PRIMARY NOT EQUAL TO HOME > > NAME=UNKNOWN > > DATA AT PSW 08FDA68A - 58F05048 0A0DB219 0000A788 > > AR/GR 0: 008FF6C8/01188012 1: 00000000/040F4000 > > 2: 00000001/00FDB9A0 3: 00000000/7EC6E268 > > 4: 00000002/00007703 5: 00000000/7EC73400 > > 6: 00000000/7EC6E060 7: 00000000/00FE0548 > > 8: 00000000/00FE05B8 9: 00000001/7EC6E268 > > A: 00000000/7EC73868 B: 00000000/00000000 > > C: 00000000/08FDA012 D: 00000000/7EC73778 > > E: 00000000/88FDA682 F: 00000000/00000024 > > END OF SYMPTOM DUMP > > DESC:PDSE structure is corrupted > > ERROR NUM:103 > > DSN:SYS6.IDI.PROD5.HIST.FEL > > VOLSER:GEM040 > > ADPages:10169 IXRecords:405168 > > ADPagesInCore:159 ADPagesRead:10010 > > ADTreeLevels:3 > > NDPages:21 IXRecords:2460 > > NDPagesInCore:7 NDPagesRead:14 > > NDTreeLevels:2 > > AD ND Tree Nodes:2430 > > Version:1 > > Orphan Pages:4682 > > RC:4 RS:01188012 > > IGW702I PDSE Directory Validation Unsuccessful > > DESC:<AD> Structure is corrupted > > LTK:D561C14040404040404040404040404040404040 > > ERROR NUM:1 > > DSN:SYS6.IDI.PROD5.HIST.FEL > > VOLSER:GEM040 > > RC:4 RS:01188012 R14:08E8D2A4 > > RPN:N/A > > VPTVFN:N/A > > IEC036I 002-A4,IGC0005E,S000TBE,KAT30,ISP03594,786B,GEM040, > > SYS6.IDI.PROD5.HIST.FEL > > IRX0250E System abend code 002, reason code 00000164. > > IRX0255E Abend in host command SELECT or address environment routine > > ISPEXEC. > > *** > > > > > > > > Best Regards, > > Thomas Berg > > ___________________________________________________________________ > > Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) > > > > Interactive is 'manual.' Batch is 'automatic.' > > > > > > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > Mark Jacobs - Listserv <mailto:[email protected]> > > May 25, 2015 at 9:50 PM > > Three more questions. > > > > 1. Do you have all the required toleration maintenance applied on your > > 1.13 system? > > 2. Does the hang occur on all systems in the sysplex or just one? > > 1. If only on one, can you recycle the SMSPDSE1 address space and > > see if that fixes the problem? > > > > Mark Jacobs > > > > > > Thomas Berg <mailto:[email protected]> > > May 25, 2015 at 9:47 PM > > BTW, we are on zOS 2.1 in the DEV system and zOS 1.13 in the prod system. > > > > > > > > Best Regards, > > Thomas Berg > > ___________________________________________________________________ > > Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) > > > > Interactive is 'manual.' Batch is 'automatic.' > > > > > > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > Mark Jacobs - Listserv <mailto:[email protected]> > > May 25, 2015 at 9:27 PM > > If you take a physical dump of the dataset and send it into IBM for > > analysis they might be able to get to the root cause. Assuming you're > > on zOS 1.13 or higher did you execute IEBPDSE against the restored > > dataset to verify its structure? > > > > Mark Jacobs > > > > > > Thomas Berg <mailto:[email protected]> > > May 25, 2015 at 9:23 PM > > AFAIK it should have a very low probability. This due to that those > > that can access from outside of the Sysplex (special sysprogs) have > > neither reason or interest of doing that. And this is 3.00 AM here. > > (At least the operator I spoke to had no knowledge of anyone else that > > me working at this time.) > > > > I have restored a backup from yesterday now so the immediate problem > > is solved. (And saved the corrupted PDSE in case anyone except me is > > interested.) > > > > > > > > Best Regards, > > Thomas Berg > > ___________________________________________________________________ > > Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) > > > > Interactive is 'manual.' Batch is 'automatic.' > > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO IBM-MAIN > > -- > > Mark Jacobs > Time Customer Service > Technology and Product Engineering > > The standard you walk past is the standard you accept. > Lt. Gen. David Morrison > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
