Edward Jaffa help my understand my problem This was the first time I used IEAMSCHD In the past when I used SCHEDULE I cleared out the 44 byte block XC to binary zeros This included SRBPKF I was erroneously under the assumption that the SRB always get control in Key 0
Sent from my iPhone > On Jun 25, 2015, at 4:20 PM, Lizette Koehler <[email protected]> wrote: > > To help others in the future when searching for answers; could you post what > you had vs. what worked? > > It could be beneficial. > > Lizette > > > > -----Original Message----- >> From: michelbutz <[email protected]> >> Sent: Jun 25, 2015 1:17 PM >> To: [email protected] >> Subject: Re: S0C4 At Entry to SRB routine >> >> I did not have storage key parameter set correctly >> On IEAMSCHD >> >> Thanks >> >> Sent from my iPhone >> >>> On Jun 25, 2015, at 8:21 AM, Shmuel Metz (Seymour J.) >>> <[email protected]> wrote: >>> >>> In <[email protected]>, on 06/22/2015 >>> at 06:36 PM, michealbutz <[email protected]> said: >>> >>>> I am at my wits end I have tried all sorts of things >>> >>> 1.Are you running from LPA or did you copy the code? >>> >>> 2. Show us the expanded code from the beginning to the point of >>> dailure. >>> >>>> I am getting S0C4 >>> >>> Registers and IC at time of failure? > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
