Did you see any of the following messages in SYSLOG? What was the first? IOS275I C.U.I.R. REQUEST TO QUIESCE THE FOLLOWING PATH(S): CHPID xx TO DEVICE(S) dev,dev1-dev2, ... CHPID yy TO DEVICE(S) dev,dev1-dev2, ... IOS278I C.U.I.R. REQUEST TO RESUME THE FOLLOWING PATH(S): CHPID xx TO DEVICE(S) dev,dev1-dev2, ... CHPID yy TO DEVICE(S) dev,dev1-dev2, ... IOS281I C.U.I.R. REQUEST SUCCESSFUL IOS283I C.U.I.R. VARY PATH(dev,xx) REJECTED, text IOS284I C.U.I.R. REQUEST REJECTED - VARY COMMAND PROCESSOR FAILED IOS290I C.U.I.R. REQUEST UNSUCCESSFUL
A path quiesced by CUIR is logically offline to the host. Use the DEVSERV PATHS command to display path status. Figure 11-4 on page 188 shows the output of the DSERV PATHS command Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Peter > Sent: Thursday, July 16, 2015 7:01 AM > To: [email protected] > Subject: Re: DASD Device Offline - Reconfiguration > > HI, > > I did V XXX,ONLINE,RESET but no luck. I am suspecting it could be problem > with CHPID. > > On Thu, Jul 16, 2015 at 7:28 PM, Gerhard Adam <[email protected]> > wrote: > > > Did you do the RESET? > > > > Adam > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:IBM- > [email protected]] > > On Behalf Of Peter > > Sent: Thursday, July 16, 2015 6:37 AM > > To: [email protected] > > Subject: DASD Device Offline - Reconfiguration > > > > Hello, > > > > One of the Volume in our System has gone to OFFLINE, when we try to > > make it online it gives : > > > > IEE529I VARY XXXX REJECTED. DEVICE OFFLINE DUE TO C.U.I.R. > > > > I understand that some reconfiguration service from the manual. > > > > But there was no reconfiguration was issued from us. > > > > Could someone please shed some light on the above when does a Device > > address gets into C.U.I.R status and how does the Reconfiguration gets > > initiated ? > > > > Peter > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
