What happens if you lower it to 1000M and then try the DUMP command again? This is dynamic and for this one dump you could try setting it lower and then retrying the dump. You can use the CHGDMP command to alter this parameter.
Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Nathan Astle > Sent: Friday, July 17, 2015 7:17 AM > To: [email protected] > Subject: Re: Dump Failing - Aux Shortage > > Hi Liz, > > Value for MAXSPACE is set : MAXSPACE=00015000M > > Nathan > > On Fri, Jul 17, 2015 at 6:56 PM, Lizette Koehler <[email protected]> > wrote: > > > Could you post the D D,O command (Dump Options?) > > > > I would like to see what your MAXSPACE is set at > > > > Lizette > > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > [mailto:[email protected]] On Behalf Of Nathan Astle > > > Sent: Friday, July 17, 2015 2:27 AM > > > To: [email protected] > > > Subject: Re: Dump Failing - Aux Shortage > > > > > > Hi, > > > > > > PageIO Total 120m Active 0 > > > Datasets Total 40 Used 11 > > > SCM Size 128G Used 120G 94.02% > > > LOCAL Size 61.9G Used 3.45G 5.57% > > > NONVIO Used 3.32G 5.36% > > > VIO Used 133M 0.21% > > > > > > > > > Type Status Size Used Pct% VIO > > > PLPA ACTIVE 70.3M 60.9M 86.62% > > > COMMON ACTIVE 703M 320K 0.04% > > > SCM ACTIVE 128G 120G 94.02% > > > LOCAL ACTIVE 6.88G 386M 5.49% VIO > > > LOCAL ACTIVE 6.88G 388M 5.51% VIO > > > LOCAL ACTIVE 6.88G 394M 5.60% VIO > > > LOCAL ACTIVE 6.88G 402M 5.71% VIO > > > LOCAL ACTIVE 6.88G 399M 5.67% VIO > > > LOCAL ACTIVE 6.88G 401M 5.70% VIO > > > LOCAL ACTIVE 6.88G 385M 5.48% VIO > > > LOCAL ACTIVE 6.88G 402M 5.72% VIO > > > LOCAL ACTIVE 6.88G 383M 5.45% VIO > > > > > > Regards, > > > Nathan > > > > > > On Fri, Jul 17, 2015 at 2:54 PM, Martin Packer > > > <[email protected] > > > > > > wrote: > > > > > > > The clue could be in "SCM 94% full" but it still seems odd to me. > > > > Can you fill us in on page data set sizes? > > > > > > > > Thanks, Martin > > > > > > > > Martin Packer, > > > > zChampion, Principal Systems Investigator, Worldwide Banking > > > > Center of Excellence, IBM > > > > > > > > +44-7802-245-584 > > > > > > > > email: [email protected] > > > > > > > > Twitter / Facebook IDs: MartinPacker > > > > Blog: > > > > > > > > https://www.ibm.com/developerworks/mydeveloperworks/blogs/MartinPa > > > cker > > > > > > > > > > > > > > > > From: Nathan Astle <[email protected]> > > > > To: [email protected] > > > > Date: 17/07/2015 10:20 > > > > Subject: Dump Failing - Aux Shortage > > > > Sent by: IBM Mainframe Discussion List <IBM- > > > [email protected]> > > > > > > > > > > > > > > > > Hello, > > > > > > > > I am trying to take a dump of NET address space but it fails with > > > > CODE > > > > 08 REASON X'46'. > > > > > > > > Manual says that there is shortage of AuxillIary Storage. > > > > > > > > When I did D ASM > > > > > > > > TYPE FULL STAT DEV DATASET NAME > > > > PLPA 86% OK 4D4C PAGE.VMVPZ33.PLPA > > > > COMMON 0% OK 4D4C PAGE.VMVPZ33.COMMON > > > > LOCAL 5% OK 9902 PAGE.VMVZ331.LOCAL1 > > > > LOCAL 5% OK 9903 PAGE.VMVZ332.LOCAL2 > > > > LOCAL 5% OK 9904 PAGE.VMVZ333.LOCAL3 > > > > LOCAL 5% OK 9905 PAGE.VMVZ334.LOCAL4 > > > > LOCAL 5% OK 9906 PAGE.VMVZ335.LOCAL5 > > > > LOCAL 5% OK 9907 PAGE.VMVZ336.LOCAL6 > > > > LOCAL 5% OK 9908 PAGE.VMVZ337.LOCAL7 > > > > LOCAL 5% OK 9909 PAGE.VMVZ338.LOCAL8 > > > > LOCAL 5% OK 991A PAGE.VMVZ339.LOCAL9 > > > > SCM 94% OK N/A N/A > > > > > > > > > > > > I dont see a shortage and there were no IRA related error message > > > > in the syslog. > > > > > > > > Also, from RMF, I see : > > > > > > > > ECSA 73% > > > > ESQA 88% > > > > SQA 52% > > > > CSA 74% > > > > > > > > I did AUXMGMT=OFF but again the Dump fails with same error > message. > > > > > > > > z/OS 2.1 > > > > > > > > Could someone please provide me your guidance. > > > > > > > > Nathan ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
