Another thought is you could open an PMR/SR with IBM. They cannot work on new issues unless they get $$$ But they should be able to look at the error and tell you if there is a ptf already available to address the error.
Just a thought. Maybe John Ells can comment on IBM being able to review the error. The other idea I had was to use the http://www.ibm.com/developerworks/ Developerworks. Might be more PL/I users over there Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Lizette Koehler > Sent: Tuesday, September 29, 2015 7:19 PM > To: [email protected] > Subject: Re: Help needed with old PL1 compiler message > > I guess if it is off support, this might require some sleuthing. > > How current is your maintenance on the PL/I compiler? If it missing some, I > would > suggest installing it. > Do you see any other error messages or traces? Does it show where the error > occurred in the compiler? > > What was changed before this run that the error occurred in? Can you go back > to a > previous version of the source and see if that runs successfully or not? > > So, if the z/OS Changed that moved control blocks around. You might need to > get an > SVC Dump of the problem and see if anything moved above the line where the > compiler expected it below the line. > > This error seems to indicate that the compiler took an S0C4 type abend. That > can be > due to a control block change. > > Do you have a previous version of the OS to IPL and run the same abending > compile > on and see if that works? > > You might see what compiler options are being used and see if any might > require > below the line control blocks. Try turning some on and off. > > Last option - (I know this may not be possible) upgrade to a current version > of PL/I > compiler. > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] > > On Behalf Of Juergen Kehr > > Sent: Tuesday, September 29, 2015 8:36 AM > > To: [email protected] > > Subject: Help needed with old PL1 compiler message > > > > Hi, > > > > unfortunately a very old PL1 Compiler (5668-910 IBM OS PL/I OPTIMIZING > > COMPILER V2.3) is still used on our systems (z/OS V1.13). > > > > Now we get the following error message during compile runs: > > > > ERROR ID L LINE MESSAGE DESCRIPTION > > > > UNRECOVERABLE DIAGNOSTIC MESSAGES > > > > IEL0001I U 595 PREPROCESSOR ERROR NUMBER 0 DURING PHASE 'CA'. > > > > The message explanation says, that this error is due to a fault in the > > preprocessor, not the source program. > > It seems that this situation occurs after using a new maintenance > > level of z/OS, but of course the compiler itself didn't change. > > > > I think it doesn't make sense to open a PMR with IBM, because the > > compiler is out of service since 12-31-2003! > > > > So any help, where we should look for is apprechiated. > > > > Regards. > > Juergen > > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
