What error message are you seeing when you try to connect? We need to see what you see. Please post complete messages.
Go to a previous syslog where the connection worked and see what HASP messages were Go to current syslog where the connection fails and see what HASP message are there. Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of venkat kulkarni > Sent: Saturday, October 31, 2015 9:28 AM > To: [email protected] > Subject: NJE Issue > > We recently modified our z/OS system with new IP address but we forgot to > change > IP in JES2PARM parmlib member ofr NJE connection. > > For one of the system we have entry like below > > /******************************************************************** > / > /* Define JES2 Applications */ > /******************************************************************** > / > SOCKET(SYS01) IPADDR=130.15.15.10, > NODE=4, > PORT=175 > SOCKET(SYS02) IPADDR=130.15.15.11, > NODE=7, > PORT=175 > SOCKET(SYS03) IPADDR=130.15.15.12, > NODE=5, > PORT=175 > > > Because of this our routing was failing from one system to another. But now I > used > dynamic command > > $addsock(SYS01),ipaddr=130.15.15.10,port=175,node=5 etc to modify the new > IP address. > > But still we are not able to route the Jobs from one syste to another.Can > anybody > help to start this NJE line connection again dynamically rather then IPLing > the > system now. > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
