You can't get a wait state code because there is nothing there to load it. All zeros is what you would expect if the "bootstrap" records never got loaded.
Sent from my iPhone > On Nov 12, 2015, at 6:58 AM, John Eells <[email protected]> wrote: > > Nathan Astle wrote: >> Hello, >> >> I did applied some maintenance to my sandbox system. When i loaded with the >> LPAR with the new address. >> >> i got the below message in the HMC, >> >> Central processor (CP) 0 is looping due to switching between program status >> words (PSWs) that are not valid. The program status word (PSW) is >> 0000000000000000. >> >> The IPLTEXT was not written to the newly cloned RES Volume. Could that be a >> reason ? >> >> >> I am not getting a correct explanation about x'000' on my search about the >> above PSW in MVS manual codes. >> >> Any suggestions ? >> >> z/OS 1.11 > <snip> > > I think (but have not tested that) you should get a 00F wait if you try to > IPL from a volume with no IPL text. However, the IPL text--at the level > matching the system you are trying to IPL--is required to IPL. If you never > wrote it to the IPL volume the IPL will fail. > > -- > John Eells > IBM Poughkeepsie > [email protected] > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
