I have a puzzling situation. Receiving HWI022I with APPLDATA matching SE SNMP community name when HWIBCPII attempts to start at IPL. Machine has one standalone partition with its own RACF DB, this one fails. The other partitions on the machine work fine, with their own RACF DB. RLIST of the profile involved shows that it appears to be identical on the two RACF DB. Userids appear identical. Cross partition authority etc etc is validated. PMR open, a couple of dumps taken show that the resource requested and returned have all the right lengths and so on. Suggestion is to check logs at the SE but the default logs don't appear to capture the BCPII traffic or API information. I am searching for documentation because I believe I have all the admin authority on that machine to enable detailed information myself but will be contacting my hardware support team for their advice as well.
Anybody happen to know how to enable detailed logging or tracing of the BCPII traffic? I would be grateful for advice because I haven't turned up any decent info in searches yet. Thanks... Thomas Ambros zEnterprise Operating Systems zEnterprise Systems Management 518-436-6433 This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information. 127 Public Square, Cleveland, OH 44114 If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:[email protected] with 'No Promotional E-mails' in the SUBJECT line. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
