The DB mount failure is probably a secondary effect of the Abend028. -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Allan Staller Sent: Thursday, November 10, 2016 7:33 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem with startup DB2
Have you looked this up? DB9GDBM1 DB9GDBM1 - ABEND=S028 U0000 REASON=04000200 ABEND028 is a failure in the paging subsystem. The reason code is not documented in the manual IBM could give you more information. 2 things you can quickly check. 1) is the MVS region size sufficient? 2) Do you have an adequate paging subsystem? HTH, -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Hilario Garcia Sent: Thursday, November 10, 2016 4:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Problem with startup DB2 Hello, After a hard stop of the partition, DB2 does not start and produces the following messages; -DB9G START DB2 S DB9GMSTR $HASP100 DB9GMSTR ON STCINRDR IEF695I START DB9GMSTR WITH JOBNAME DB9GMSTR IS ASSIGNED TO USER START2 , GROUP SYS1 $HASP373 DB9GMSTR STARTED IEF403I DB9GMSTR - STARTED - TIME=13.51.31 DSNY024I -DB9G DSNYASCP MSTR INITIALIZATION IS STARTING DSNZ002I -DB9G DSNZINIT SUBSYSTEM DB9G SYSTEM PARAMETERS LOAD MODULE NAME IS DB9GPARM DSNZ016I -DB9G DSNZINIT 093 SUBSYSTEM DB9G SYSTEM PARAMETERS ARE AS FOLLOWS: SYSTEM PARM DSN910.DB9G.SDSNEXIT(DB9GPARM) DSNHDECP DSN910.DB9G.SDSNEXIT(DSNHDECP) ACCESS EXIT DSN910.DB9G.SDSNEXIT(DSNX@XAC) IDAUTH EXIT DSN910.DB9G.SDSNEXIT(DSN3@ATH) SIGNON EXIT DSN910.DB9G.SDSNEXIT(DSN3@SGN) DSN7407I -DB9G DSN7GAR1 094 AUTOMATIC RESTART MANAGER REGISTER FAILED. MVS IXCARM RETURN CODE = 0000000C, MVS IXCARM REASON CODE = 00000160. S DB9GIRLM $HASP100 DB9GIRLM ON STCINRDR IEF695I START DB9GIRLM WITH JOBNAME DB9GIRLM IS ASSIGNED TO USER START2 , GROUP SYS1 $HASP373 DB9GIRLM STARTED IEF403I DB9GIRLM - STARTED - TIME=13.51.39 DXR180I DJ9G001 AUTOMATIC RESTART MANAGER IS NOT ENABLED DXR117I DJ9G001 INITIALIZATION COMPLETE DSNY001I -DB9G SUBSYSTEM STARTING IEC161I 056-084,DB9GMSTR,DB9GMSTR,BSDS1,,,DSN910.DB9G.BSDS01, 103 IEC161I DSN910.DB9G.BSDS01.DATA,USERCAT.Z110.DB2V9 IEC161I 056-084,DB9GMSTR,DB9GMSTR,BSDS1,,,DSN910.DB9G.BSDS01, 104 IEC161I DSN910.DB9G.BSDS01.INDEX,USERCAT.Z110.DB2V9 IEC161I 062-086,DB9GMSTR,DB9GMSTR,BSDS1,,,DSN910.DB9G.BSDS01, 105 IEC161I DSN910.DB9G.BSDS01.DATA,USERCAT.Z110.DB2V9 IEC161I 056-084,DB9GMSTR,DB9GMSTR,BSDS2,,,DSN910.DB9G.BSDS02, 106 IEC161I DSN910.DB9G.BSDS02.DATA,USERCAT.Z110.DB2V9 IEC161I 056-084,DB9GMSTR,DB9GMSTR,BSDS2,,,DSN910.DB9G.BSDS02, 107 IEC161I DSN910.DB9G.BSDS02.INDEX,USERCAT.Z110.DB2V9 IEC161I 062-086,DB9GMSTR,DB9GMSTR,BSDS2,,,DSN910.DB9G.BSDS02, 108 IEC161I DSN910.DB9G.BSDS02.DATA,USERCAT.Z110.DB2V9 DSNJ127I -DB9G SYSTEM TIMESTAMP FOR BSDS= 16.295 08:27:14.61 DSNJ001I -DB9G DSNJW007 CURRENT COPY 1 ACTIVE LOG 110 DATA SET IS DSNAME=DSN910.DB9G.LOGCOPY1.DS02, STARTRBA=000151800000,ENDRBA=0001539BFFFF DSNJ001I -DB9G DSNJW007 CURRENT COPY 2 ACTIVE LOG 111 DATA SET IS DSNAME=DSN910.DB9G.LOGCOPY2.DS02, STARTRBA=000151800000,ENDRBA=0001539BFFFF DSNJ099I -DB9G LOG RECORDING TO COMMENCE WITH 112 STARTRBA=000152F2D000 S DB9GDBM1 $HASP100 DB9GDBM1 ON STCINRDR SYSTEM ID SYS1 DATE 10/28/2016 2016.302 LINE 6,664 PAGE 2 IEF695I START DB9GDBM1 WITH JOBNAME DB9GDBM1 IS ASSIGNED TO USER START2 , GROUP SYS1 $HASP373 DB9GDBM1 STARTED IEF403I DB9GDBM1 - STARTED - TIME=13.51.52 DSNY024I -DB9G DSNYASCP DBM1 INITIALIZATION IS STARTING IEA989I SLIP TRAP ID=X028 MATCHED. JOBNAME=DB9GDBM1, ASID=0041. *DSNV086E -DB9G DB2 ABNORMAL TERMINATION REASON=00E80100 IEA989I SLIP TRAP ID=X47B MATCHED. JOBNAME=DB9GMSTR, ASID=0040. IEA989I SLIP TRAP ID=X13E MATCHED. JOBNAME=DB9GMSTR, ASID=0040. IEF450I DB9GDBM1 DB9GDBM1 - ABEND=S028 U0000 REASON=04000200 175 TIME=13.51.59 IEF404I DB9GDBM1 - ENDED - TIME=13.51.59 $HASP395 DB9GDBM1 ENDED DXR110I DJ9G001 STOP COMMAND ACCEPTED IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=0041. IEF450I DB9GMSTR DB9GMSTR - ABEND=S04F U0000 REASON=00000000 180 TIME=13.51.59 $HASP250 DB9GDBM1 PURGED -- (JOB KEY WAS D18FC9B3) DXR121I DJ9G001 END-OF-TASK CLEANUP SUCCESSFUL - HI-CSA 377K - HI-ACCT-CSA 0K IEF404I DB9GMSTR - ENDED - TIME=13.52.00 $HASP395 DB9GMSTR ENDED IEF404I DB9GIRLM - ENDED - TIME=13.52.00 IEF352I ADDRESS SPACE UNAVAILABLE $HASP395 DB9GIRLM ENDED IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=0040. IEA989I SLIP TRAP ID=X33E MATCHED. JOBNAME=*UNAVAIL, ASID=003D. $HASP250 DB9GIRLM PURGED -- (JOB KEY WAS D18FC9A7) $HASP250 DB9GMSTR PURGED -- (JOB KEY WAS D18FC99F) DSN3104I -DB9G DSN3EC0X - TERMINATION COMPLETE DSN3100I -DB9G DSN3EC0X - SUBSYSTEM DB9G READY FOR START COMMAND I have also looked at the System Log and the following error messages appear: IOEZ00001E zFS I / O error 2101520 occurred for aggregate DSN910.SDSNAZF IOEZ00002E MMRE error id = 31 cis = 11 if = 0 of = 15 buf = 7E4A4000 CI = 0 BPXF002I FILE SYSTEM DSN910.SDSNAZFS WAS 984 NOT MOUNTED. RETURN CODE = 0000008A, REASON CODE = EF096058 IOEZ00001E zFS I / O error 2101520 occurred for aggregate DSN910.SDSNJCC IOEZ00002E MMRE error id = 31 cis = 11 if = 0 of = 15 buf = 7E4A2000 CI = 0 BPXF002I FILE SYSTEM DSN910.SDSNJCC WAS 987 NOT MOUNTED. RETURN CODE = 0000008A, REASON CODE = EF096058 I have tried to run IOEAGSLV with all the options but they give me all the following error: IOEZ00001E zFS I / O error 2101520 occurred for aggregate DSN910.SDSNAZFS IOEZ00002E MMRE error id = 31 cis = 12 if = 0 of = 15 buf = 1F8D2000 CI = 2 Any comments to try to solve the errors and be able to start DB2. Thank you very much. Hilario ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ---------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
