Exactly what I was going to suggest. However, the volume will not complete the drain until empty. This *may* take weeks, depending on your installations choices. YMMV.
This may require a major subsystem be bounced so the output can be purged. I have seen cases where a JES restart was required to free the spool space. Draining/restarting initiators is also helpful. Spool Offload can also be a big help here. Use the output of the $DSPL command to process as much as you can prior to restarts You may get luck. IIRC, as of JES 2.1 there is a variation of the Drain command that causes the spool data to be migrated to the remaining volumes. HTH, <snip> Try $djq(*),spl-(splz00) It's probably an STC, maybe a TSU </snip> ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ---------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
