First, is the port that your TELNET1 service is trying to use reserved for it? Maybe something else has the port it is attempting to use.
Found in "z/OS Communications Server: IP Messages Volume 4 (EZZ, SNM)" EZZ6011I jobname requested_service FAILED, RC = rc RSN = rsn Explanation z/OS® UNIX System Services callable service was unable to complete successfully. jobname is the name of the procedure that is used to start the TN3270 server or the job name identifier of the procedure that is used to start the TN3270 server. If you start the TN3270.TNSRV1 server, the jobname value TNSRV1. If you start the TN3270 server, the jobname value is TN3270. requested_service is the name of the requested service to perform. rc is the return code of the requested service. rsn is the reason code of the requested service. For REGISTER and DEREGISTER services, the last half of the reported Reason Code is the z/OS UNIX System Services reason code. System action None. Operator response Contact the system programmer to diagnose the problem. System programmer response See the z/OS UNIX System Services Messages and Codes for an explanation of the rc and the rsn. Module EZAZMTNS Procedure name TCP/IP Al Nims Systems Admin/Programmer 3 UFIT University of Florida (352) 273-1298 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Nathan Astle Sent: Tuesday, April 18, 2017 1:12 PM To: [email protected] Subject: Error message lookup help Hi Cross posted For some reason the IBM sites are not opening Can someone please help me out with the below error explanation EZZ6011I TELNET1 BPX1SOC FAILED, RC = 00000070 RSN = 12CA00B6 Nathan ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
