The only other thing that I can think of is an entry in the 
/etc/services or equivalent!!!

        vmnet           175/tcp         # JES NJE over TCP/IP           



-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf 
Of Gibney, Dave
Sent: Wednesday, November 01, 2017 4:45 PM
To: [email protected]
Subject: Re: Moving from NJE over ESCON CTC to IP

All ove the internal Hipersocket inside the CEC network.

> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] 
> On Behalf Of Cieri, Anthony
> Sent: Wednesday, November 01, 2017 1:44 PM
> To: [email protected]
> Subject: Re: Moving from NJE over ESCON CTC to IP
> 
>       Is the new IP path traversing any Firewalls???
> 
>       If so, Port 175 will need to be opened between the end points!
> 
> 
> 
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] 
> On Behalf Of Gibney, Dave
> Sent: Wednesday, November 01, 2017 4:38 PM
> To: [email protected]
> Subject: Re: Moving from NJE over ESCON CTC to IP
> 
> Using EJES,
> LINES -- DELENN Line Status 
> ------------------------------------------------------------------
> ------------------------- Row 1 of
> Cmd Device   Status   Node     Work-Selection   Line-Limit Page-Limit JobName
> JobID    Owner    CurLines TotLines ApplID   Unit
> sss ssssssss/ssssssss ssssssss ssssssssssssssss ssssssssss ssssssssss 
> ssssssss ssssssss ssssssss ssssssss ssssssss ssssssss ssss
>     LNE1     ACTIVE
> TCP
>     LNE2     ACTIVE
> TCP
>     LNE3     ACTIVE
> TCP
>     LNE4     ACTIVE
> TCP
> 
> > -----Original Message-----
> > From: IBM Mainframe Discussion List 
> > [mailto:[email protected]] On Behalf Of Cieri, Anthony
> > Sent: Wednesday, November 01, 2017 1:15 PM
> > To: [email protected]
> > Subject: Re: Moving from NJE over ESCON CTC to IP
> >
> >     Dave,
> >
> >     My first thought would be to check for some "available" UNIT=TCP
> > Jes2 lines.
> >
> >     Hth
> >     Tony
> >
> >
> > -----Original Message-----
> > From: IBM Mainframe Discussion List 
> > [mailto:[email protected]] On Behalf Of Gibney, Dave
> > Sent: Wednesday, November 01, 2017 3:51 PM
> > To: [email protected]
> > Subject: Moving from NJE over ESCON CTC to IP
> >
> > I think I've done an equivalent set of JESPARMS, but I get this
> >           $HASP568 NODE=AISDEVL - AUTOMATIC CONNECT (SOCKET=AISDEVL)
> >           IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 
> > 192.168.1.3
> >  Port: 175 Initiated
> >           IAZ0543I NETSRV4 TCP/IP connection with IP Addr: 
> > 192.168.1.3
> >  Port: 175 Successful
> >           IAZ0543I NETSRV4 TCP/IP connection with IP Addr:
> >  srcpos02.ad.wsu.edu
> > Port: 175 ended due to failure of NJETCP Signon to complete within 
> > allotted time
> >
> > For all connection. The 192.168.1 network is over Hipersocket
> >
> > Undoubtably, I am missing something simple in the TFM
> >
> > Dave Gibney
> > Information Technology Services
> > Washington State University
> >
> >
> > --------------------------------------------------------------------
> > -- For IBM-MAIN subscribe / signoff / archive access instructions, 
> > send email to [email protected] with the message: INFO 
> > IBM-MAIN
> >
> > --------------------------------------------------------------------
> > -- For IBM-MAIN subscribe / signoff / archive access instructions, 
> > send email to [email protected] with the message: INFO 
> > IBM-MAIN
> 
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO IBM-MAIN
> 
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
[email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to