The IEF032I Joblog Message
IEF032I STEP/SAS9 /STOP 2017344.2055
CPU: 0 HR 00 MIN 00.67 SEC SRB: 0 HR 00 MIN 00.02 SEC
VIRT: 912K SYS: 292K EXT: 46616K SYS: 11788K
ATB- REAL: 1044K SLOTS: 0K
VIRT- ALLOC: 11M SHRD: 0M
has the REGION SIZE allocated in the sum of the EXT + SYS = 46616K+11788K=
58404K = 57 MegaBytes
Barry
Merrilly yours,
Herbert W. Barry Merrill, PhD
President-Programmer
Merrill Consultants
MXG Software
10717 Cromwell Drive technical questions: [email protected]
Dallas, TX 75229
http://www.mxg.com admin questions: [email protected]
tel: 214 351 1966
fax: 214 350 3694
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On
Behalf Of Lizette Koehler
Sent: Wednesday, December 13, 2017 9:20 AM
To: [email protected]
Subject: Re: Possible Debug issue
Depending on you IEFUSI or other functions used to control region size, you
may not be getting what you think 0M gives you.
If you try the suggestion of 2000M for region and rerun the job, what do you
get?
If you have an ACTRT exit in your shop - it may provide the virtual storage
map at step end. There you should the Requested/Below/above/ and so forth of
storage allocation for the step.
Lizette
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]]
> On Behalf Of Savor, Thomas (Alpharetta)
> Sent: Tuesday, December 12, 2017 11:16 PM
> To: [email protected]
> Subject: Re: Possible Debug issue
>
> On this particular test that got all the storage error
> messages......region was set to 0M
>
> Thanks,
>
> Tom Savor
> Software Developer, Sr
> FRMS-SCM
> Fiserv
> Office: 678-375-1307
> Mobile: 404-660-6898
> Fax: 678-375-3280
> www.fiserv.com
>
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]]
> On Behalf Of Peter Hunkeler
> Sent: Wednesday, December 13, 2017 1:14 AM
> To: [email protected]
> Subject: AW: Re: Possible Debug issue
>
> >Debug Tool and Fault Analyzer seem to take a huge amount of memory
> >when
> working with COBOL 5. Try setting REGION=2000M.
>
>
> What release of z/OS managed to move the whole common area above the bar?
> Seriously, 2000M will probably never be available in the private
> region. But if you want to see how much you need to be able to debug,
> within the maximum available, specify REGION=0M.
>
>
> --
> Peter Hunkeler
>
>
>
>
>
> --
> Peter Hunkeler
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email
to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
