Hi I recycled CAS and issues fixed.
On 01-Mar-2018 10:57 AM, "Lizette Koehler" <[email protected]> wrote: > Whenever I look at CAS abends: If the offset is close, and the symptoms > match, then I usually find the apar as matching close enough 106c vs 1070 > - to me it is close enough > > Do you know if the symptoms in the apar are what was going on when the > S0C4 occurred? > > That would be the only way to know. Otherwise the dump would need to be > reviewed by IBM Catalog support. Since this is z/OS V1.13 - and off > support, probably this would be the best they could do. But they do have > access to more entries than you or I would through IBM LINK > > I would be less likely to think it may be a match if the byte different is > over 100 but under 100 - it is a possibility > > > Lizette > > > > -----Original Message----- > > From: IBM Mainframe Discussion List [mailto:[email protected]] On > > Behalf Of Peter > > Sent: Wednesday, February 28, 2018 10:19 PM > > To: [email protected] > > Subject: Re: Job abended in CAS > > > > Is this same case with this as the offset value differs ..? > > > > On 01-Mar-2018 10:39 AM, "Lizette Koehler" <[email protected]> > wrote: > > > > > I would go into IBMLINK and use the module name and FMID In the search > > > > > > IGG0CLFG HDZ1D10 > > > > > > You may come across APAR . OA45158 > > > > > > > > > Lizette > > > > > > > > > > -----Original Message----- > > > > From: IBM Mainframe Discussion List > > > > [mailto:[email protected]] On Behalf Of Lizette Koehler > > > > Sent: Wednesday, February 28, 2018 10:06 PM > > > > To: [email protected] > > > > Subject: Re: Job abended in CAS > > > > > > > > This is going to be an issue. > > > > > > > > z/OS V1.13 is way off support. You could open a PMR/SR but IBM could > > > > only look to see if there were any apars for that specific issue. > > > > > > > > Have you looked in IBMLINK to see if there are any apars that match > > > > your issue? > > > > > > > > Lizette > > > > > > > > > > > > > -----Original Message----- > > > > > From: IBM Mainframe Discussion List > > > > > [mailto:[email protected]] On Behalf Of Peter > > > > > Sent: Wednesday, February 28, 2018 9:57 PM > > > > > To: [email protected] > > > > > Subject: Job abended in CAS > > > > > > > > > > Hi > > > > > > > > > > One of our schedule Job abended with below > > > > > > > > > > ABEND0C4 IGG0CLGF +106C FMID=HDZ1D10 MAINT=UA68225 > > > > > > > > > > We are at zOS 1.13 > > > > > > > > > > Not able to find a Google hit on the above offset > > > > > > > > > > Anyone have faced a similar issue ? > > > > > > > > > > Peter > > > > > > > > > > ------------------------------------------------------------------ > > > > > ---- For IBM-MAIN subscribe / signoff / archive access > > > > > instructions, send email to [email protected] with the > > > > > message: INFO IBM-MAIN > > > > > > > > -------------------------------------------------------------------- > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > > send > > > email to > > > > [email protected] with the message: INFO IBM-MAIN > > > > > > ---------------------------------------------------------------------- > > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > > email to [email protected] with the message: INFO IBM-MAIN > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to > > [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
