Hi Peter, Once you have completed the configuration and have all volumes and paths defined, use the mkpprc and rmpprc commands to 'make' or 'remove' copy pairs.
E.g. something like; mkpprc -dev IBM.2107-serial1 -remotedev IBM.2107-serial2 -type mmir -mode full -critmode A001-A06F:3001-306F rmpprc -dev IBM.2107-serial1 -remotedev IBM.2107-serial2 -at src -quiet A001-A06F:3001-306F Note: serial1 and serial2 will be the serial numbers for the local and remote arrays - make sure this is the correct way around! These examples set up pairs for a range of CKD volumes, i.e. A001>3001, A002>3002, A003>3003 etc up to '6F'. You can do one at a time. You'll get lots of messages like; CMUC00153I mkpprc: Remote Mirror and Copy volume pair relationship 3001:A001 successfully created. There's also the failoverpprc and failbackpprc commands for disaster recovery situations but I've not really played with these much so can't advise on these but they may be worth further reading. thanks, Simon -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Peter Sent: 17 September 2018 04:51 To: IBM-MAIN@LISTSERV.UA.EDU Subject: [EXTERNAL] IBM copy services Split and replicate option WARNING: this email has originated from outside of the SSE Group. Please treat any links or attachments with caution. ********************************************************************** Hi Apology for the dummy query. After TPCR, this is is the first I am looking at IBM Copy services . Now we are in metro mirroring . Under IBM Copy services which option is that on which performs the breaking of replication and re-establishes the replication. I am going through each options session , storage , paths , console but I am not getting clue Is there anyone who is using IBM Copy services and can guide me a bit ? Peter ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ****************************************************************** SSE and associated brands: Southern Electric, Scottish Hydro, SWALEC and Atlantic are all trading names of SSE Electricity Limited registered in England and Wales number 04094263 (supply of electricity and Feed-In Tariffs); Southern Electric Gas Limited registered in England and Wales number 02716495 (supply of gas); SSE Retail Telecoms Limited registered in England and Wales number 10086511 (supply of home phone and broadband); SSE Home Services Limited registered in Scotland number SC292102 (boiler and heating repair, servicing, cover, boiler Installations and electrical wiring cover); SSE Energy Solutions Limited registered in Scotland number SC386054 (energy efficiency installations and insulation products). All members of the SSE Group. The registered office of SSE Electricity Limited, Southern Electric Gas Limited and SSE Retail Telecoms Limited is No. 1 Forbury Place, 43 Forbury Road, Reading, RG1 3JH. The registered office of SSE Home Services Limited and SSE Energy Solutions Limited is Inveralmond House, 200 Dunkeld Road, Perth, PH1 3AQ. SSE Electricity Limited is an appointed representative of SSE Home Services Limited. SSE Home Services Limited is authorised and regulated by the Financial Conduct Authority (FCA) under reference number 695476. You can check this on the Financial Services Register by visiting the FCA website. ****************************************************************** ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
