Hi, We are having problems configuring Control-T to work with our new IBM TS7760. We've gone through the documented steps, but things are not working right.
Our Configuration: The computer has 4 partitions. There is no sharing of DASD between the partitions. Control-T is installed on all partitions. Each Partition was assigned a different set of categories. This was verified with the DS QL,CATS command. All of the required step to configure the ATL to SMS were performed. The exits CBRUXCUA, CBRUXEJC, and CBRUXENT were compiled into a library which was added to the Linklist. The IBM versions of these exits were removed from sys1.linklib. The ATL is online to SMS OAM is up. Control-T is up in all partitions. The problem: When we add a Virtual Tape Volume in the ATL that is not defined in the MDB for a partition, we get these messages in OAM: CTTCBR13: VOLUME: T00103 NOT FOUND IN MDB. VOLUME IS IGNORED CBR3620I ENTRY OF VOLUME T00103 INTO LIBRARY MLVTL FAILED. CBR3621I ENTER REQUEST IGNORED BY THE CARTRIDGE ENTRY INSTALLATION EXIT (CBRUXENT). Message CTTCBR13 is not documented anywhere. In the partition where this volume is defined in the MDB, nothing happens. When I restart OAM in the partition, the volume is accepted, and defined in SMS. We see these messages in OAM: CBR3610I VOLUME ENTRY PROCESSING. 324 THE FOLLOWING VOLUMES WERE ENTERED INTO LIBRARY MLVTL. T00103 Why do I have to restart OAM for the Virtual volume to be added? Thanks Gadi ????? ?? ????? ???? ???? ???? ?????? ??? ??? ?????? ???? ????? ??? ?????? ??????. ?? ????, ???????? ?? ??? ???? ?????, ??????? ???? ???? ????? ?? ??? ????? ?????? ?? ?????. ????? ????? ???? ?? ?????? ?????? ?????? ???? ?? ???? ??????? ??? ???, ?/?? ?????, ????? ?? ????? ????? ????? ????? ?????? ?? ????? ??????? ?/?? ?????? ?? ??????. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
