Thanks everyone.

Our current situation is, we have zBC10 running z/OS v1.12.  We want to upgrade 
everything to current, including z/OS and hardware.  I understand we can't get 
support for either z/OS or zBC12, but I am looking for options and if anyone 
has successfully done this type of upgrade. If so, what steps were taken?

- Can we get maintenance for z/OS v1.12, understanding we might have to pay IBM 
something for it?
- Will z/OS v1.12 work on z14, I understand the answer is maybe.  But, has 
anyone done it?  If so and willing to share, we would like to know
- If not, we are looking at the possibility of move z/OS v1.12 to zBC12, 
upgrade to z/OS v2.3, then z14.  Again, we probably would need maintenance on 
z/OS v1.12

Jerry 

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf 
Of Richards, Robert B.
Sent: Monday, January 07, 2019 8:42 AM
To: [email protected]
Subject: Re: z/OS 1.12 question

I must have misinterpreted the following then:

" If not, any ideas of how to get z/OS *and* hardware upgrade to current."


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf 
Of R.S.
Sent: Monday, January 07, 2019 8:26 AM
To: [email protected]
Subject: Re: z/OS 1.12 question

IMHO the COD has nothing to do here.
Jerry wrote about mahcine change (upgrade) , not OS upgrade.

Jerry,
Your system is out of service. That means you won't be able to get *for
free* any PTFs released after EOS date. That means your system may not 
recognize z14 correctly. It does NOT mean it won't work at all, but there's a 
risk.

--
Radoslaw Skorupka
Lodz, Poland






W dniu 2019-01-07 o 14:01, Richards, Robert B. pisze:
> https://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=an&subtype
> =ca&appname=gpateam&supplier=897&letternum=ENUS218-458
>
> IBM Customized Offerings Driver V3.1, a prebuilt, stand-alone driving system 
> to meet IBM z/OS installation requirements, has been updated.
>
> The IBM(r) Customized Offerings Driver is a prebuilt, stand-alone driving 
> system that can be used to install z/OS(r) ServerPac, z/OS SystemPac (in 
> dump-by-dataset format, where available), and z/OS Custom-Built Product 
> Delivery Offering (CBPDO) packages when you do not have a driving system that 
> meets the minimum requirements for IBM z/OS installation. The Customized 
> Offerings Driver is updated and is now a subset of a z/OS V2.2 system with 
> Job Entry Subsystem 2 (JES2) that can run on any IBM Z(r) processor that is 
> supported by z/OS V2.2, or later.
>
> The Customized Offerings Driver requires three 3390-9 or larger DASD volumes, 
> a non-Systems Network Architecture (SNA) terminal or Hardware Management 
> Console (HMC) 3270 emulator for a z/OS console, and an SNA terminal for a 
> Time Sharing Option Extended (TSO/E) session. The Customized Offerings Driver 
> is delivered on DVD media.
>
> For up-to-date information about the Customized Offerings Driver, including 
> supported media, DASD volume sizes, product levels included, z/OS hardware 
> and software prerequisites, and driving system requirements, see the current 
> z/OS PSP bucket (Upgrade ZOSV2R3, Subset ZOSGEN) and z/OS Planning for 
> Installation (GA32-0890) at the z/OS Internet Library.
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] 
> On Behalf Of Edgington, Jerry
> Sent: Monday, January 07, 2019 7:57 AM
> To: [email protected]
> Subject: z/OS 1.12 question
>
> As anyone upgraded a z/OS 1.12 from zBC10 to z14, directly?  If so, what 
> issues or gothas were there? Anything to look at for? If not, any ideas of 
> how to get z/OS and hardware upgrade to current.
>
> Thanks,
> Jerry Edgington
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO IBM-MAIN .
>


======================================================================

Jeśli nie jesteś adresatem tej wiadomości:

- powiadom nas o tym w mailu zwrotnym (dziękujemy!),
- usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś 
na dysku).
Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać 
tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) 
tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać 
karze.

mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: [email protected]. Sąd Rejonowy dla m. st. 
Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 0000025237, 
NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 
01.01.2018 r. wynosi 169.248.488 złotych.

If you are not the addressee of this message:

- let us know by replying to this e-mail (thank you!),
- delete this message permanently (including all the copies which you have 
printed out or saved).
This message may contain legally protected information, which may be used 
exclusively by the addressee.Please be reminded that anyone who disseminates 
(copies, distributes) this message or takes any similar action, violates the 
law and may be penalised.

mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 
Warszawa,www.mBank.pl, e-mail: [email protected]. District Court for the Capital 
City of Warsaw, 12th Commercial Division of the National Court Register, KRS 
0000025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 
169,248,488 as at 1 January 2018.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to