You can look up return code and feedback2 in the SNA messages and codes manual 
(or maybe SNA programming).

However, NetView RCFB 10 00 is quicker and gives this:

CNMR1000                     RTCD     FDBK2                       Page 1 of 2
                             X'10'(16)0

            Logical unit not available, application program status not
            available, queued BIND not available, or incorrect dial
            parameters
            This code is set for one of the following reasons:
            o   You are attempting to establish a session with a
                logical unit that is not active.
            o   You are attempting to pass a logical unit to a primary
                logical unit that is not active (or is in the process
                of being deactivated).
            o   You are attempting to issue an OPNSEC macroinstruction
                and there is no queued BIND request to respond to.
            o   You are attempting to determine the status of an
                application program that is in another domain, the
                status is not available, and your application program
                has to proceed without it.
            o   You issued a SIMLOGON macroinstruction that specifies
                dial parameters for a nonswitched PU.

CNMR10X0                     RTCD     FDBK2                       Page 2 of 2
                             X'10'(16)0

            o   The dial parameters specified in the SIMLOGON
                macroinstruction do not match the original dial
                parameters.
            The RPL system-sense (SSENSEI), the system-sense modifier
            (SSENSMI), and the user-sense (USENSEI) can contain a more
            detailed explanation of the failure.

Mike Wawiorko   

-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of 
Peter
Sent: 23 April 2019 05:24
To: [email protected]
Subject: Re: LU2 type sample logmode


This message originated from outside our organisation and is from web based 
email - [email protected]

This time when I do with SNX32704

I get

 the request fails with return code 10 , Fbk2=00, sense=8570003.

I know 8570003 comes up for CONCT status of LU. but what does it mean by
FBK2=00 and return code 10 ?


_________________________________________________________________________________________________________________________________________________________________________________________________________________________________

This message is for information purposes only, it is not a recommendation, 
advice, offer or solicitation to buy or sell a product or service nor an 
official confirmation of any transaction. It is directed at persons who are 
professionals and is not intended for retail customer use. Intended for 
recipient only. This message is subject to the terms at: 
www.barclays.com/emaildisclaimer.

For important disclosures, please see: 
www.barclays.com/salesandtradingdisclaimer regarding market commentary from 
Barclays Sales and/or Trading, who are active market participants; and in 
respect of Barclays Research, including disclosures relating to specific 
issuers, please see http://publicresearch.barclays.com.

______________________________________________________________________________________________________________________________________________________________________
If you are incorporated or operating in Australia, please see 
https://www.home.barclays/disclosures/importantapacdisclosures.html for 
important disclosure.
______________________________________________________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________________________________________________
How we use personal information  see our privacy notice 
https://www.investmentbank.barclays.com/disclosures/personalinformationuse.html
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________

________________________________________
Barclays offers wealth and investment management products and services to its 
clients through Barclays Bank PLC. This email 
may relate to or be sent from other members of the Barclays Group.
The availability of products and services may be limited by the applicable laws 
and regulations in certain jurisdictions. 
The Barclays Group does not normally accept or offer business instructions via 
internet email. Any action that you might 
take upon this message might be at your own risk.
This email and any attachments are confidential and intended solely for the 
addressee and may also be privileged or exempt 
from disclosure under applicable law. If you are not the addressee, or have 
received this email in error, please notify 
the sender immediately, delete it from your system and do not copy, disclose or 
otherwise act upon any part of this email 
or its attachments.
Internet communications are not guaranteed to be secure or without viruses. The 
Barclays Group does not accept responsibility 
for any loss arising from unauthorised access to, or interference with, any 
Internet communications by any third party, or 
from the transmission of any viruses. Replies to this email may be monitored by 
the Barclays Group for operational or business 
reasons.
Any opinion or other information in this email or its attachments that does not 
relate to the business of the Barclays Group 
is personal to the sender and is not given or endorsed by the Barclays Group.
Barclays Bank PLC. Registered in England and Wales (registered no. 1026167).
Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.
Barclays Bank PLC is authorised by the Prudential Regulation Authority and 
regulated by the Financial Conduct Authority and the Prudential Regulation 
Authority ( Financial Services Register No. 122702).
______________________________________________________________________________________________________________________________________________________________________
If you are incorporated or operating in Australia, please see 
https://www.home.barclays/disclosures/important-apac-disclosures.html for 
important disclosure.
______________________________________________________________________________________________________________________________________________________________________

This e-mail and any attachments are confidential and intended solely for the 
addressee and may also be privileged or exempt from disclosure under applicable 
law. If you are not the addressee, or have received this e-mail in error, 
please notify the sender immediately, delete it from your system and do not 
copy, disclose or otherwise act upon any part of this e-mail or its attachments.
Internet communications are not guaranteed to be secure or virus-free. The 
Barclays Group does not accept responsibility for any loss arising from 
unauthorised access to, or interference with, any Internet communications by 
any third party, or from the transmission of any viruses. Replies to this 
e-mail may be monitored by the Barclays Group for operational or business 
reasons.
Any opinion or other information in this e-mail or its attachments that does 
not relate to the business of the Barclays Group is personal to the sender and 
is not given or endorsed by the Barclays Group.
Barclays Services Limited provides support and administrative services across 
Barclays group. Barclays Services Limited is an appointed representative of 
Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services 
Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the 
Prudential Regulation Authority and regulated by the Financial Conduct 
Authority and the Prudential Regulation Authority. Clydesdale Financial 
Services Limited is authorised and regulated by the Financial Conduct Authority.

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to