Now it's resolved by IBM hardware engineer.

The 3592 tape drive went offline after a firmware update and had to restart
the VTL.

Any clue to set an email alert when drives goes offline ?

On Sun, 5 May, 2019, 8:39 AM Mike Schwab, <[email protected]> wrote:

> http://www.redbooks.ibm.com/redbooks/pdfs/sg248366.pdf
>
> TS7700 V  Updated 2019.  Chapter 10.  This is a list of the mainframe
> z/os console commands to operate the library, assuming properly
> configured and data replicated.
>
> DISPLAY SMS,LIBRARY(ALL),DETAIL or D SMS,LIB(ALL),DETAIL lists the
> libraries and device types.
> VARY SMS,LIBRARY(libname),ONLINE get the library online.
> VARY unit,ONLINE gets the UCBs online.
> DEVSERV QTAPE or DS QT show the status of the library.
>
> On Sat, May 4, 2019 at 11:22 PM Jake Anderson <[email protected]>
> wrote:
> >
> > Hi
> >
> > Just to add
> >
> > I was looking through the TS7700 events and found a fix procedure as
> >
> > HYDIN0671I
> > All drives are reported are in the busy state
> >
> > All the drives are reported as errno=5
> >
> > Which translates to physical library is offline to host
> >
> > Jake
> >
> > On Sun, 5 May, 2019, 8:05 AM Jake Anderson, <[email protected]>
> > wrote:
> >
> > > Hi
> > >
> > > After the DR our VTL had a problem with its physical tape drive.
> > >
> > > There are almost 220GB of data waiting for to use physical tape drive
> > >
> > > Any clue on where I need to check ?
> > >
> > > The tape drive attached are in failed state .
> > >
> > > Any suggestions are welcome
> > >
> > > Jake
> > >
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to [email protected] with the message: INFO IBM-MAIN
>
>
>
> --
> Mike A Schwab, Springfield IL USA
> Where do Forest Rangers go to get away from it all?
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to