When you are only about 1/2 thorough the apar list, if you print more than 1000 
jobs before restarting VPSIP, it would abend, the jobs all needed to use|need 
SYS1.IMAGELIB.  Then when we got to #18 on the list, the site could produce 
84,000+ jobs (again all needed SYS1.IMAGELIB), before the abend.  Now with the 
next 3 apars, we appear to be able to print an unlimited number of jobs, but we 
split VPSIP into two separate regions and restart them both weekly just in 
case, but once we get the final 2 on, we will probably try to go without 
restarting any more.

BRian


On Tue, 17 Sep 2019 18:44:02 +0000, Gibney, Dave <[email protected]> wrote:

>Well, I do run VPS/TCPIP
>Key  Product Name 
>---  ------------ 
>012  DRS        
>001  VPS        
>004  VPS/PCL    
>002  VPS/TCPIP  
>
>z/OS 2.1 at RSU1903 (RSU1908 included in the set that could come on with the 
>error bypass. 
>We don't have many printers, but they are all TCP/IP network attached. So far 
>I've not experienced (or at least not noticed) any of the errors in the link.
>
>Since I found the Health Check disappointing, I could consider backing the 
>bypassed PTFs out. I haven't looked. Are the SMF fields with the USERCSA data 
>also part of one or more of the PTFs in this chain? There were 27 that went on 
>with the bypass and selecting UA94607. (And 31 others that had dependencies 
>satisfied :) )
>
>Only running them in the sandboxes for now.
> 
>> -----Original Message-----
>> From: IBM Mainframe Discussion List <[email protected]> On
>> Behalf Of Brian Westerman
>> Sent: Monday, September 16, 2019 9:22 PM
>> To: [email protected]
>> Subject: Re: Considering Bypassing ERROR HOLD for OA58037
>> 
>> That's part of a pretty long comedy of errors that apply to (mostly) LRS's
>> VPSIP product.  If you are running VPSIP, like several of our sites, then you
>> are likely aware of the issues that this whole string of aparas has caused.
>> 
>> https://urldefense.proofpoint.com/v2/url?u=https-
>> 3A__www.ibm.com_support_pages_debchk-2Ddeb-2Dlock-2Dnew-
>> 2Dfunction-2Dlist-
>> 2Dmaintenance&d=DwIFaQ&c=C3yme8gMkxg_ihJNXS06ZyWk4EJm8LdrrvxQ
>> b-
>> Je7sw&r=u9g8rUevBoyCPAdo5sWE9w&m=RfHnql3CpaS3KFsgCx5LqRORoZTp
>> 07SIADw0RnXZmcA&s=4Cib0hikGVj-
>> d0uZAk1aIUAIlm51FKWEuYtMho4Ehww&e=
>> 
>> If you are not using VPSIP then it probably won't effect you either way to
>> bypass the hold.
>> 
>> Brian
>> 
>> ----------------------------------------------------------------------
>> For IBM-MAIN subscribe / signoff / archive access instructions, send email to
>> [email protected] with the message: INFO IBM-MAIN
>
>----------------------------------------------------------------------
>For IBM-MAIN subscribe / signoff / archive access instructions,
>send email to [email protected] with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to