Hello Don,
Did you get this working? I have a z890 with VSE 2.6.1 under
z/VM 4.3. I have the OSA-Express and QDIO working well. All problems
network related have gone away.
Ed Martin
Aultman Health Foundation
330-588-4723
[EMAIL PROTECTED]
ext. 40441
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of Hooker, Don - OIT
> Sent: Wednesday, May 31, 2006 2:28 PM
> To: [email protected]
> Subject: TCPIP4VSE and z/VM OSAX QDIO VSWITCHHW
>
> We are still having problems getting the above communications working.
> On our VSE 2.62 systems that is. IBM recommended some PTFs:
>
> UD52153 was already applied. I was getting:
>
> IPN631I Control has been passed to the TCP/IP engine
> 0016: IPL605E Unable to Initialize IJBOSA, return code: 1
> 0016: IPL609E Unable to initialize OSA Express, Link: VM_TCPIP
> 0P27I I UNKNWN DEV SYSXXX=D00
> CCSW=00000871200E000100 CCB=000000
> SNS= 8200
>
> IBM also recommended UD52628 but I found UD52332 first which seemed to
> describe our symptoms so
> I applied that first (despite it being superceded by UD52628) but when
I
> continued to have problems,
> I went ahead and applied UD52628. Then I was getting:
>
> IPL605E Unable to Initialize IJBOSA, return code: 57472
> IPL609E Unable to initialize OSA Express, Link: VM_TCPIP
>
> I installed z/VSE 3.11 and tested it there and it worked fine.
>
> The trouble is we need to get it working on our VSE 2.62 systems.
> Does anybody on VSE 2.6 have it working?
>
> I tried copying the IJBOSA phase from the z/VSE 3.11 system to a VSE
> 2.62 system and I get:
>
> 0S39I ERROR DURING OSA EXPRESS PROCESSING,REASON=0035
> CUU=0D00,RETCODE=E080
> 0S02I A CANCEL OR CANCEL ALL MACRO WAS ISSUED
> 0S00I SUB SPINCPU CANCELED
>
> Here are some definitions:
>
> In PROFILE EXEC for the VSE:
>
> CP DEF NIC D00 TYPE QDIO DEV 3
>
> VSE IPL ADD statement:
>
> ADD D00:D02,OSAX QDIO to VSWITCH for acc to VM TCPIP
>
> In AUTOLOG1 PROFILE EXEC:
>
> 'CP SET VSWITCH DTCVSW1 GRANT DTCVSW1'
> 'CP SET VSWITCH DTCVSW1 GRANT TCPIP'
> 'CP SET VSWITCH DTCVSW1 GRANT VSETSG1'
>
> Here is result of a Q VSWITCH:
>
> q vswitch dtcvsw1 details acc
>
> VSWITCH SYSTEM DTCVSW1 Type: VSWITCH Connected: 1 Maxconn:
INFINITE
>
> PERSISTENT RESTRICTED NONROUTER Accounting: OFF
>
> VLAN Unaware
>
> State: Ready
>
> IPTimeout: 5 QueueStorage: 8
>
> Portname: UNASSIGNED RDEV: B000 Controller: DTCVSW1 VDEV: B000
>
> Portname: UNASSIGNED RDEV: C000 Controller: DTCVSW1
>
> Authorized userids:
>
> DTCVSW1 SYSTEM TCPIP VSEDEV2 VSETSG1 ZVSEBASE
>
> VSWITCH Connection:
>
> RX Packets: 4108339 Discarded: 4 Errors: 0
>
> TX Packets: 7319948 Discarded: 0 Errors: 0
>
> RX Bytes: 1102773999 TX Bytes: 9321899949
>
> Device: B002 Unit: 002 Role: DATA
>
> Adapter Owner: TCPIP NIC: E000 Name: UNASSIGNED
>
> RX Packets: 4108343 Discarded: 0 Errors: 0
>
> TX Packets: 7319955 Discarded: 0 Errors: 0
>
> RX Bytes: 1102774777 TX Bytes: 9321900961
>
> Device: E002 Unit: 002 Role: DATA
>
> Options: Broadcast Multicast IPv4 VLAN
>
> Unicast IP Addresses:
>
>
>
> MORE...
> OITDC01
> 10.128.254.57 MAC: 02-00-00-00-00-01
> 172.16.32.2 MAC: 02-00-00-00-00-01
> 172.30.8.11 MAC: 02-00-00-00-00-01
> 172.30.8.52 MAC: 02-00-00-00-00-01
> Multicast IP Addresses:
> 224.0.0.1 MAC: 01-00-5E-00-00-01
> Ready;
>
>
> So once again, does anyone have this working on a VSE 2.62 system
under
> z/VM 5.2?
> Does anyone have any ideas how I can get it to work?
>
> Thanks in advance,
> Don
