Hello Alan,
I was IPLing both tapes in the same CMS user machine.
But I am getting the errors. Now to convince the EMC CE that these are
not
the erroneous Smoke detector errors.
Thanks for your patience, and explanations.
Ed Martin
Aultman Health Foundation
330-588-4723
[EMAIL PROTECTED]
ext. 40441
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of Alan Altmark
> Sent: Friday, July 21, 2006 1:15 PM
> To: [email protected]
> Subject: Re: HCPCLS174E using VSE SA util tape
>
> On Friday, 07/21/2006 at 11:24 AST, "Edward M. Martin"
> <[EMAIL PROTECTED]> wrote:
> > Hello Alan,
> >
> > Unfortunately the paging volumes are on the 430RES and 430W03
> > used by lots.
> >
> > I understand that this is a CP message, but wouldn't the
> > Standalone program driving the system be doing the page request?
>
> If you IPL a standalone program in an LPAR, then there is no need for
this
> page request. It only occurs when you IPL something (anything) in a
> guest. CP cannot send a real IPL request to the device; so he has to
> simulate it. A hardware IPL doesn't have that problem.
>
> > And if it is asking the wrong page requirement request(s) would
> > that not cause the HCP message?
> >
> > And wouldn't the ICKDSF standalone get the same messages?
>
> No, and no. The error indicates that CP got an I/O error of some
sort. If
> you suspect the device is failing, running EREP and looking at the
report
> should confirm it. Of course, if EMC has already told you the device
is
> having problems, then I'd believe them.
>
> When you get a chance, move your paging and spooling areas to
dedicated
> volumes without minidisks on them.
>
> Alan Altmark
> z/VM Development
> IBM Endicott
