Hi,
We are using DIAG A8, and we are getting a RC of 3. This does not appear to be documented. We can see a condition code of 3, but not the R15 RC of 3.
Has anyone seen documentation for this RC?
| Table 17. DIAGNOSE Code X'A8' Return
Codes in the Guest's Register 15 with CC=1 | ||
|
Condition
Code |
Return Code
in Register 15 |
Status
|
| 1 | 1 (X'01') | Device not attached.
Note: This indicates that either the device has not been logically attached, or that the physical path to the device has been lost. If the physical path to the device has been lost, then some portion of the channel program may have been executed. This is because CP may have used multiple real channel programs to perform the I/O operation. |
| 1 | 2 (X'02') | Device is not supported. |
| 1 | 5 (X'05') | Device is busy, or has an interrupt pending. |
If you receive a condition code of 3, this indicates that an unrecoverable I/O error occurred or the I/O was terminated at the user's request by entering an exigent command. If the I/O error resulted in a unit check, then sense data is stored in the sense data field and the amount of sense data stored is in the sense data count field. Return code 13 is set in the guest's register 15, indicating that a permanent I/O error occurred.
Thanks,
Ken Vance
Amadeus
