Not on a z9....z/890... Tom Duerbusch THD Consulting
>>> [EMAIL PROTECTED] 10/2/2006 3:50:17 PM >>> Will reply with different detail on the LINUX-390 list, where this was cross posted. The only ATTACH/DETACH in the traditional sense would be the FCP channels. They work a lot like ethernet adapters. Think of them as OSAs and things begin to make more sense. But they are called "channels" in SAN land. So then, the tape drives in question are "out there" in the storage area network. Attaching those is a different concept than CP ATTACH or DETACH. Are you running a z9? If not, then all of your Linux guests will look like the same mainframe to the SAN. -- R; Tom Duerbusch <[EMAIL PROTECTED]> Sent by: The IBM z/VM Operating System <[email protected]> 10/02/2006 03:55 PM Please respond to The IBM z/VM Operating System <[email protected]> From Tom Duerbusch <[EMAIL PROTECTED]> To [email protected] cc Subject zLinux and IBM 3592-E05 tape drives We are thinking about buying some IBM 3592-E05 tape drives for the Open System group (well, actually, it's comming out of their budget), and we will put them in our, yet to be purchased IBM 3494 robotics unit. The tape drives will be dedicated to a FC SAN thingie. Apparently, we can attach the mainframe to the FC SAN thingie, using FCP connections. Then, zLinux can have access to them. As FCP tape drives are not known to VM. And I have some 20-30 Linux images running under VM, what is the procedure to attach/detach these tape drives to each image? Or is it something stupid, like I have to dedicate the drives to one machine and then backup over vswitch from one machine to another to the tape drives? (I say stupid, as backing up over "communications" usually takes more resources than backing up over hardware....directly to the drives.) Tom Duerbusch THD Consulting
